You can participate in domains by joining the thin client device to a domain or by using roaming profiles.
Select the option according to your company’s network availability on a domain.
If you select the option Network without a domain , then enter Workgroup, and then click Next.
To apply the changes, you must restart the computer. Click Finish.
When joining the thin client device to a domain, the Unified Write Filter should be disabled so that the domain information can be permanently stored on the thin client device. The Unified Write Filter should remain disabled through the next restart as information is written to the thin client on the restart after joining the domain. This UWF is important when joining an Active Directory domain. For details on disabling and enabling the Unified Write Filter, see Before Configuring your Thin Client .
To make the domain changes permanent, complete the following:
If you use the Write Filter Enable icon to enable the Write Filter, the restart happens automatically. By default, the NetXClean utility purges all but selected profiles on the system when the thin client device starts up or when the user logs off. For information on the NetXClean utility, see NetXClean Utility .
You can participate in domains by writing roaming profiles to the C drive. The profiles must be limited in size, and it is not retained when the thin client device is restarted. For successful downloading and proper functioning, there must be sufficient disk space available for roaming profiles. Sometimes, it may be necessary to remove software components to free space for roaming profiles.