Dell EMC PowerVault MD 34XX/38XX Series Storage Arrays Administrator's Guide

PDF

Changing the virtual disk modification priority

You can specify the modification priority setting for a single virtual disk or multiple virtual disks on a storage array.

Guidelines to change the modification priority of a virtual disk:

If more than one virtual disk is selected, the modification priority defaults to the lowest priority. The current priority is shown only if a single virtual disk is selected.
Changing the modification priority by using this option modifies the priority for the selected virtual disks.

To change the virtual disk modification priority:

In the AMW, select the Storage & Copy Services tab.
Select a virtual disk.
In the menu bar, select Storage > Virtual Disk > Change > Modification Priority.
The Change Modification Priority window is displayed.
Select one or more virtual disks. Move the Select modification priority slider bar to the desired priority.
NOTE: To select nonadjacent virtual disks, press <Ctrl> click and select the appropriate virtual disks. To select adjacent virtual disks, press <Shift> click the appropriate virtual disks. To select all of the available virtual disks, click Select All.
Click OK.
A message prompts you to confirm the change in the virtual disk modification priority.
Click Yes.
Click OK.