Dell EMC PowerVault MD 34XX/38XX Series Storage Arrays Administrator's Guide

Locating physical disks in a disk pool

You can use the Blink option to physically locate and identify all of the physical disks that comprise a selected disk pool.

1. Select the Storage & Copy Services tab.
2. Select the disk pool in the Tree view or the Table view.
3. From the menu bar, select Storage > Disk Pool > Blink.
   The LEDs on each physical disk that make up the selected disk pool blink.
4. Locate the physical disks in the disk pool, and click OK.
   The LEDs stop blinking.

   NOTE: If the LEDs for the disk pool do not stop blinking, from the AMW, select Hardware > Blink > Stop All Indications.
5. Click OK.