Passer au contenu principal
  • Passer des commandes rapidement et facilement
  • Voir les commandes et de suivre l'état de votre expédition
  • Profitez membres seulement récompenses et des remises
  • Créez et accédez à une liste de vos produits
  • Gérez vos sites Dell EMC, vos produits et vos personnes-ressources pour les produits dans Administration de l’entreprise.

XPS 13 Service Manual

Procedure

  1. Remove the two screws (M1.6x3) that secure the I/O board to the palm-rest assembly.
  2. Peel off the tape that secures the display cable to the I/O board.
  3. Disconnect the media-card reader cable from the I/O board.
  4. Open the latch and disconnect the I/O-board cable from the I/O board.
  5. Open the latch and disconnect the fingerprint-reader cable (optional) from the I/O board.
    Figure 1. Removing the I/O boardImage: Removing the I/O board.
    1. screws (2)
    2. tape
    3. display cable
    4. latch
    5. I/O-board cable
    6. fingerprint-reader cable (optional)
    7. latch
    8. media-card reader cable
  6. Peel off the tape that secures the I/O board.
  7. Starting from the outer edge, lift the I/O board at an angle and remove the I/O board.
    Figure 2. Removing the I/O boardImage: Removing the I/O board.
    1. palm-rest assembly
    2. I/O board

  Veuillez évaluer cet article (1 à 5 étoiles).
  Veuillez évaluer cet article (1 à 5 étoiles).
  Veuillez évaluer cet article (1 à 5 étoiles).
  Avez-vous trouvé cet article utile?
  Les commentaires ne peuvent pas contenir ces caractères spéciaux : <>()\