Gå til hovedindhold
  • Afgiv ordrer hurtigt og nemt
  • Se ordrer og spor status for din forsendelse
  • Opret og få adgang til en liste med dine produkter
  • Administrer dine Dell EMC-websteder, -produkter og -kontaktpersoner på produktniveau ved hjælp af Company Administration (Virksomhedsadministration).

XPS 13 Service Manual

Running the ePSA Diagnostics

Invoke diagnostics boot by either of the methods that are suggested below:

  1. Power on the computer.
  2. As the computer boots, press the F12 key when the Dell logo is displayed.
  3. In the boot menu screen, use Up/Down arrow key to select the Diagnostics option and then press Enter.
    • NOTE: The Enhanced Pre-boot System Assessment window displays, listing all devices detected in the computer. The diagnostics starts running the tests on all the detected devices.
  4. Press the arrow in the lower-right corner to go to the page listing. The detected items are listed and tested.
  5. To run a diagnostic test on a specific device, press Esc and click Yes to stop the diagnostic test.
  6. Select the device from the left pane and click Run Tests.
  7. If there are any issues, error codes are displayed. Note the error code and contact Dell.

    or

  8. Shut down the computer.
  9. Press and hold the Fn key, while pressing the power button, and then release both.
  10. Repeat steps 3–7 above.

Bedøm indholdet

Nøjagtig
Nyttig
Nemt at forstå
Var denne artikel nyttig?
0/3000 characters
  Angiv vurderinger (1-5 stjerner).
  Angiv vurderinger (1-5 stjerner).
  Angiv vurderinger (1-5 stjerner).
  Angiv, om artiklen var nyttig eller ej.
  Kommentarer må ikke indeholde følgende specialtegn: <>()\