PowerProtect DD3300 Hardware Overview and Installation Guide

Revision history

Table 1. Document revision history
Revision Date Description
11 February 2022 Changed the system installation instructions.
10 December 2021 Added information about not using 169.254.0.X and 169.254.1.X IP addresses on external interfaces to avoid conflicts with DDOS-iDRAC interconnect addresses.
09 August 2021 Added clarifications regarding the use of serial over LAN (SOL).
08 July 2021 Corrected the port identifiers for the FC card.
07 March 2021 Added the key mappings for console redirection to the Configure iDRAC section.
06 December 2020 Updated to include a list of supported and unsupported features for the underlying DDVE in the Using the system section.
05 September 2020 Updated for:
  • Instant Access Instant Restore support for 8 TB, 16 TB, and 32 TB configurations
  • Updated instructions for changing the IDRAC IP address during configuration with VT100+ keyboard emulation
  • Clarified product serial number information.
  • Clarified virtual disk usage for 8 TB configurations.
04 December 2018 Updated for:
  • 8 TB configuration
  • 4 x 10 GbE RJ-45 network daughter card
  • Optional FC card for VTL
  • Port failover
  • Serial over LAN through iDRAC
03 July 2018 Updated for:
  • Storage overhead enhancements
  • SSD Cache Tier support
  • Product serial number tag changes
02 February 2018 Editorial revisions.
01 January 2018 Initial publication.

Évaluez ce contenu

Précis
Utile
Facile à comprendre
Avez-vous trouvé cet article utile ?
0/3000 characters
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez indiquer si l’article a été utile ou non.
  Les commentaires ne doivent pas contenir les caractères spéciaux : <>()\