Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products

Dell OptiPlex 7450 All-In-One Owner's Manual

Product specifications

Table 1. Product specificationsThe table describes the specifications of M.2 Intel Optane memory module
FeaturesSpecification
Capacities 16 GB, 32 GB
Expansion cards PCIe 3.0 x 2
M.2 form factors (all densities) 2280–S3–B-M
Performace
  • Seq R/W: Up to 1350/290 MS/s
  • QD4 4HB Random Read: 240K + IOPs
  • QD4 4HB Random Write: 240K + IOPs
Latency (average sequential)
  • Read 8.25 µ
  • Write: 30 µ
Components
  • Intel 3D XPoint Memory Media
  • Intel Controller and Firmware
  • PCIe 3.0x2 with NVMe Interface
  • Intel Rapid Storage Technology 15.2 or later
Operating System Support Windows 10 64 bit
Supported Platforms 7th generation or newer Intel Core processor based platforms
Power
  • 3.3V Supply Rail
  • Active: 3.5 W
  • Drive Idel :900mW to 1.2W
Compliance
  • NVMe Express 1.1
  • PCI Express Base specifiation rev 3.0
  • PCI M.2 HS Spec
Certification and Declarationsµ UL, CE, C-Tick, BSMI, KCC, Microsoft WHQL, Microsoft WHCK, VCCI
Endurance Rating
  • 100 GB Writes per day
  • Upto 182.3 TBW (Terabytes written)
Temperature Specification
  • Operating: 0 to 70º C
  • Non-Opearting: 10 to 85º C
  • Temperature monitoring
Shock 1500 G/0.5msec
Vibration
  • Operating: 2.17 GRMs(5–800Hz)
  • Non-Operating: 3.13 GRMS (5–800Hz)
Altitude (Simulated)
  • Operating: –1,000 ft to 10,000 ft
  • Non-Operating: –1,000 ft to 40,000 ft
Product Ecological Compliance RoHS
Reliability
  • Uncorrectable Bit Error Rate (UBER): 1 sector per 1015 bits read
  • Mean Time Between Failure (MTBF): 1.6 million hours

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\