Skip to main content
Contact Us

Latitude 5455 Owner's Manual

PDF

Removing the battery cable

CAUTION:The information in this removal section is intended for authorized service technicians only.

Prerequisites

  1. Follow the procedure in Before working inside your computer.
  2. Remove the base cover.
  3. Remove the battery.

About this task

The following images indicate the location of the battery cable and provide a visual representation of the removal procedure.

Figure 1. Removing the battery cable
Image: Removing the battery cable

Steps

  1. Remove the Mylar that adheres the connector to the battery.
  2. Turn the battery over and remove the Mylar that adheres the battery cable to the battery.
  3. Disconnect the battery cable from the connector on the battery.
  4. Remove the battery cable from the routing guides on the battery.
    CAUTION:DO NOT pull the battery cable upwards to disconnect it from the battery. This action can damage the battery or battery cable.
    Figure 2. Disconnecting the battery cable
    Image: Disconnecting the battery cable

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\