Skip to main content
Contact Us

Latitude 5455 Owner's Manual

PDF

Screw list

NOTE:When removing screws from a component, it is recommended to note the screw type and the quantity of screws, and then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is restored when the component is replaced.
NOTE:Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surfaces when replacing a component.
NOTE:Screw color may vary depending on the configuration ordered.
Table 1. Screw listThe following table provides the different screws that are used in your Latitude 5455.
Component Screw type Quantity Screw image

Base cover

M2x7.9 (captive)

2

Image: M2x7.9 screw

Base cover

M2x5.5

5

Image: M2x5.5 screw

Battery

M2x4.5 (captive)

5

Image: M2x4.5 screw

Fan

M2x2.5

3

Image: M2x2.5 screw

Solid state drive (SSD) thermal shield

M2x2.5

1

Image: M2x2.5 screw

Display hinges

M2.5x4.5

4

Image: M2.5x4.5 screw

WLAN-antenna module

M2x2.5

1

Image: M2x2.5 screw

WLAN-thermal shield

M2x2.5

1

Image: M2x2.5 screw

Heat sink

M2x2.5

4

Image: M2x2.5 screw

System board

M1.6x1.8

2

Image: M1.6x1.8 screw

Touchpad assembly

M1.6x1.8

9

Image: M1.6x1.8 screw

I/O board

M2x2.5

2

Image: M2x2.5 screw

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\