Comparing NIC
or CNA profiles against systems in a collection
About this task
This feature
enables you to generate a comparison report of how a NIC/CNA profile
is applied to systems and identify any mismatches from the target
systems.
To generate a comparison report:
Steps
In Configuration Manager Version 1610, Configuration Manager 2012 SP2, Configuration Manager
2012 R2 SP1, Configuration Manager 2012 R2, Configuration Manager
2012 SP1, Configuration Manager 2012, in Device Collections, right-click All Dell Lifecycle Controller Servers and select Dell Lifecycle Controller > Launch Config Utility.
Select the Network Adapter Comparison Report option.
On the Network Adapter Comparison Report screen,
click Browse and select the NIC or CNA profile
file that you have applied to the collection.
A progress bar indicates that the target
systems are scanned and a comparison report is generated.
After the comparison report is generated, the following colors are
displayed:
White — indicates that the profile that was applied and
the profile on the target system are matching.
Red — indicates that there is a mismatch while applying
the profile to the target system.
Grey — indicates that either the profile you applied
is not configured, or the attribute is missing in the target system.
The following details are also displayed:
Target System — the name of the target system against
which you are comparing the profile.
Target Adapter — the type of adapter present on the target
system. A target system can have multiple adapters.
Configuration Applied — the configuration is applied
to the target system.
Select any record on the comparison report and click View
Details to view the Port Comparison details. The details of the ports on the system are displayed. The
color coding is similar to the Comparison Report screen. See step 4.
Select the port and click View Details to
view the Personality Comparison details. The
following details are displayed:
Partition — the partition number on the port.
Personality — original personality of the target system
on the partition.
Personality Applied — the personality applied from the
NIC/CNA profile to the partition.
Min. Bandwidth — the minimum bandwidth that was available
on the partition.
Min. Bandwidth Applied — the minimum bandwidth applied
to the partition.
Max. Bandwidth — the maximum bandwidth that was available
on the partition.
Max. Bandwidth Applied — the maximum bandwidth applied
to the partition.
The color coding is similar to the Comparison Report screen. See step 4 for details.
Select any of the partitions and click View Port Details. The Port Details screen displays NIC and iSCSI attribute details.
The following details are displayed:
Attribute — the list of NIC or iSCSI attributes.
System Value — the attribute value that was present on
the system.
Value Applied — the attribute value applied from the
profile.
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\