
Integrated Dell Remote Access Controller 9 Attribute Registry
System Attributes
System.AcquisitionInfo.CostCenter (Read or Write)
- Display Name
- Cost Center
- Description
- Identifying information for the accounting unit within the purchasing company that authorized the purchase.
- Legal Values
- String of up to 64 ASCII characters.
- Default Value
- None
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.AcquisitionInfo.Expensed (Read or Write)
- Display Name
- Expensed
- Description
- Determines whether the cost of the system was subtracted from the budget of a particular person or department in the purchasing company.
- Legal Values
- Yes - 0
- No - 1
- Default Value
- 1
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.AcquisitionInfo.InstallDate (Read or Write)
- Display Name
- Installation Date
- Description
- Date the system was put into service by the purchasing company.
- Legal Values
- String of up to 32 ASCII characters.
- Default Value
- None
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.AcquisitionInfo.PONumber (Read or Write)
- Display Name
- Purchase Order Number
- Description
- Number of the purchase order that authorized buying the system.
- Legal Values
- String of up to 32 ASCII characters.
- Default Value
- 0
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.AcquisitionInfo.PurchaseCost (Read or Write)
- Display Name
- Purchase Cost
- Description
- Value expressed in currency unit that was paid for the system, for example, 25000.
- Legal Values
- String of up to 32 ASCII characters.
- Default Value
- 0
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.AcquisitionInfo.PurchaseDate (Read or Write)
- Display Name
- Purchase Date
- Description
- Date the transaction for acquiring the system was completed.
- Legal Values
- String of up to 32 ASCII characters.
- Default Value
- None
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.AcquisitionInfo.Vendor (Read Only)
- Display Name
- Vendor
- Description
- Company who sold the system to the purchaser.
- Legal Values
- String of up to 64 ASCII characters.
- Default Value
- Dell
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.AcquisitionInfo.WayBill (Read or Write)
- Display Name
- Reference to Delivery Slip Number
- Description
- Identifying information for the waybill or delivery slip, such as a waybill number.
- Legal Values
- String of up to 32 ASCII characters.
- Default Value
- 0
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.AcquisitionInfo.WhoSigned (Read or Write)
- Display Name
- Who Signed
- Description
- Person who accepted delivery of the system.
- Legal Values
- String of up to 64 ASCII characters.
- Default Value
- None
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.Backplane.BackplaneBusMode (Read Only)
- Display Name
- Backplane Bus Mode
- Description
- Enclosure serial interface type, either SGPIO or I2C
- Legal Values
- Unknown - 0
- I2C - 1
- SGPIO - 2
- Default Value
- 1
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.Backplane.BackplaneSplitMode (Read or Write)
- Display Name
- Backplane Split Mode
- Description
- Enclosure split mode setting
- Legal Values
- Integer values from 0 to 255.
- Default Value
- 0
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.ChassisInfo.CMStatus (Read Only)
- Display Name
- ChassisManagerStatus
- Description
- Chassis Manager status
- Legal Values
- CM OFFLINE - 0
- CM ONLINE - 1
- Default Value
- 0
- Write Privilege
- N/A
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- Yes
System.CustomAsset.Label (Read or Write)
- Display Name
- Custom Asset Label
- Description
- Custom Asset label.
- Legal Values
- String of up to 64 ASCII characters.
- Default Value
- None
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.CustomAsset.Value (Read or Write)
- Display Name
- Custom Asset Value
- Description
- Custom Asset value
- Legal Values
- String of up to 255 ASCII characters.
- Default Value
- None
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.DepreciationInfo.Duration (Read or Write)
- Display Name
- Duration
- Description
- Displays the duration for which the depreciation value is being calculated.
- Legal Values
- String of up to 64 ASCII characters.
- Default Value
- 0
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.DepreciationInfo.DurationUnit (Read or Write)
- Display Name
- Duration Unit
- Description
- Indicates the duration in months or years.
- Legal Values
- Months - 0
- Years - 1
- Default Value
- 0
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.DepreciationInfo.Method (Read or Write)
- Display Name
- Method
- Description
- Displays the steps and assumptions used to compute the systems depreciation.
- Legal Values
- String of up to 64 ASCII characters.
- Default Value
- None
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.DepreciationInfo.Percentage (Read or Write)
- Display Name
- Percentage
- Description
- Indicates the portion of 100 that an asset is devalued or depreciated. If the duration of depreciation is 5 years, and the method is straight line, then the percentage is 20 percent.
- Legal Values
- String of up to 32 ASCII characters.
- Default Value
- 0
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.Diagnostics.OSAppCollectionTime (Read Only)
- Display Name
- OS App Collection Time
- Description
- Displays the last OS and Application Data collection time in GMT/UTC
- Legal Values
- String of up to 64 ASCII characters.
- Default Value
- None
- Write Privilege
- Server Control and Configuration
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.ExtWarrantyInfo.Cost (Read or Write)
- Display Name
- Cost
- Description
- Displays the total cost of the warranty service on a system.
- Legal Values
- String of up to 32 ASCII characters.
- Default Value
- 0
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.ExtWarrantyInfo.EndDate (Read or Write)
- Display Name
- End Date
- Description
- Displays the date that extended warranty service ends.
- Legal Values
- String of up to 32 ASCII characters.
- Default Value
- None
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.ExtWarrantyInfo.Provider (Read or Write)
- Display Name
- Provider
- Description
- Displays the name of the business that is providing warranty service to the system owner.
- Legal Values
- String of up to 64 ASCII characters.
- Default Value
- None
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.ExtWarrantyInfo.StartDate (Read or Write)
- Display Name
- Start Date
- Description
- Displays the date that extended warranty service begins. This date usually follows the standard warranty service.
- Legal Values
- String of up to 32 ASCII characters.
- Default Value
- None
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.IdleServerDetection.IdleServerScanInterval (Read or Write)
- Display Name
- Idle Server Scan Interval
- Description
- Scan interval time in hours for which server utilization to be monitored.
- Legal Values
- Integer values from 1 to 9000.
- Default Value
- 240
- Write Privilege
- Configure iDRAC
- License Required
- Datacenter License
- Dependency
- None
- Is Platform Dependent
- No
- Notes
- These attributes are only available for supported CUPS capable Intel processors.
System.IdleServerDetection.IdleServerStatus (Read Only)
- Display Name
- Idle Server Status
- Description
- Idle server status: Idle or Utilized
- Legal Values
- Utilized - 0
- Idle - 1
- Default Value
- 0
- Write Privilege
- N/A
- License Required
- Datacenter License
- Dependency
- None
- Is Platform Dependent
- No
- Notes
- These attributes are only available for supported CUPS capable Intel processors.
System.IdleServerDetection.IdleServerThreshold (Read or Write)
- Display Name
- Idle Server Threshold
- Description
- Idle server detection threshold in %
- Legal Values
- Integer values from 0 to 50.
- Default Value
- 20
- Write Privilege
- Configure iDRAC
- License Required
- Datacenter License
- Dependency
- None
- Is Platform Dependent
- No
- Notes
- These attributes are only available for supported CUPS capable Intel processors.
System.IdleServerDetection.ServerUtilizationPercentile (Read or Write)
- Display Name
- Server Utilization Percentile
- Description
- Server utilization percentile indicates how many % of samples are above utilization threshold
- Legal Values
- Integer values from 80 to 100.
- Default Value
- 80
- Write Privilege
- Configure iDRAC
- License Required
- Datacenter License
- Dependency
- None
- Is Platform Dependent
- No
- Notes
- These attributes are only available for supported CUPS capable Intel processors.
System.Job.EnableJobAutoDelete (Read or Write)
- Display Name
- Enable Job Auto Delete
- Description
- Controls automatic deletion of completed and failed iDRAC jobs. When enabled, a periodic timer automatically removes eligible completed and failed jobs at a fixed interval.
- Legal Values
-
- Disabled - 0
- Enabled - 1
- Default Value
- 0
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.Job.JobTimeout (Read or Write)
- Display Name
- Job Time out
- Description
- Configurable Timeout for Update Job Completion (Value in Minutes).
- Legal Values
- Integer values from 60 to 360.
- Default Value
- 120
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.Job.RebootJobType (Read or Write)
- Display Name
- Reboot Job Type
- Description
- Configurable Reboot Job Type for Firmware Update Job
- Legal Values
- GracefulRebootWithForcedShutdown - 0
- Powercycle - 1
- Default Value
- 0
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.LCD.ChassisIdentifyDuration (Read or Write)
- Display Name
- Chassis Identify Duration
- Description
- Enable/Disable chassis Identify. A value of -1 = force on indefinitely; 0 = 0ff; > 0 number of seconds chassis identify is on
- Legal Values
- Integer values from -1 to 2592000.
- Default Value
- 0
- Write Privilege
- Server Control and Configuration
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
- Notes
- The System.LCD get and set commands work on iDRAC on Blade Server, even if the LCD is not present on the server.
- You can change the LCD group attributes for monolithic servers even if the LCD is not present on servers.
System.LCD.Configuration (Read or Write)
- Display Name
- LCD Configuration
- Description
- Current LCD configuration. If this is set to User Defined, the User defined string will be displayed on the LCD.
- Legal Values
- User Defined - 0
- Model Name - 1
- None - 2
- iDRAC IPv4 Address - 4
- iDRAC MAC Address - 8
- OS System Name - 16
- Service Tag - 32
- IPv6 Address - 64
- Ambient Temperature - 128
- Airflow - 129
- System Watts - 256
- Asset Tag - 512
- Post - 1024
- ADStat - 2048
- ADTime - 2049
- ADComp - 2050
- ADErr - 2051
- Default Value
- 32
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- When hostsetting is not zero only zero maybe written to LCD configuration
- Is Platform Dependent
- Yes
- Notes
- The System.LCD get and set commands work on iDRAC on Blade Server, even if the LCD is not present on the server.
- You can change the LCD group attributes for monolithic servers even if the LCD is not present on servers.
System.LCD.CurrentDisplay (Read Only)
- Display Name
- Current LCD Display String
- Description
- The string currently displayed on the LCD
- Legal Values
- String of up to 256 ASCII characters.
- Default Value
- None
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- Yes
- Notes
- The System.LCD get and set commands work on iDRAC on Blade Server, even if the LCD is not present on the server.
- You can change the LCD group attributes for monolithic servers even if the LCD is not present on servers.
System.LCD.ErrorDisplayMode (Read or Write)
- Display Name
- Error Display Mode
- Description
- LCD error message format selection SEL or simple where simple format include the message ID.
- Legal Values
- SEL - 1
- simple - 2
- Default Value
- 1
- Write Privilege
- Server Control and Configuration
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- Yes
- Notes
- The System.LCD get and set commands work on iDRAC on Blade Server, even if the LCD is not present on the server.
- You can change the LCD group attributes for monolithic servers even if the LCD is not present on servers.
System.LCD.FrontPanelLocking (Read or Write)
- Display Name
- Front Panel Locking
- Description
- Sets LCD button interface to Full-Access;View-Only; or No access (Locked)
- Legal Values
- Full-Access - 0
- View-Only - 1
- Locked - 2
- Default Value
- 0
- Write Privilege
- Server Control and Configuration
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- Yes
- Notes
- The System.LCD get and set commands work on iDRAC on Blade Server, even if the LCD is not present on the server.
- You can change the LCD group attributes for monolithic servers even if the LCD is not present on servers.
System.LCD.HideErrs (Read or Write)
- Display Name
- Hide Errors
- Description
- Hide or unhide errors displayed on LCD screen.
- Legal Values
- hide - 0
- unhide - 1
- Default Value
- 1
- Write Privilege
- N/A
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- Yes
- Notes
- The System.LCD get and set commands work on iDRAC on Blade Server, even if the LCD is not present on the server.
- You can change the LCD group attributes for monolithic servers even if the LCD is not present on servers.
System.LCD.LicenseMsgEnable (Read or Write)
- Display Name
- Enable License Message
- Description
- Enable/disable display of no license available for certain licensable features.
- Legal Values
- No-License-Msg - 0
- Display-Licens-Msg - 1
- Default Value
- 0
- Write Privilege
- Server Control and Configuration
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- Yes
- Notes
- The System.LCD get and set commands work on iDRAC on Blade Server, even if the LCD is not present on the server.
- You can change the LCD group attributes for monolithic servers even if the LCD is not present on servers.
System.LCD.NMIResetOverride (Read or Write)
- Display Name
- NMI Reset Override
- Description
- Enable/disables iDRAC reset capability via the Chassis ID button
- Legal Values
- DIsabled - 0
- IDButtonResets - 1
- IDButtonDoesNotReset - 2
- Default Value
- 0
- Write Privilege
- Server Control and Configuration
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- Yes
- Notes
- The System.LCD get and set commands work on iDRAC on Blade Server, even if the LCD is not present on the server.
- You can change the LCD group attributes for monolithic servers even if the LCD is not present on servers.
System.LCD.NumberErrsHidden (Read Only)
- Display Name
- Number of errors hidden
- Description
- The number of hidden LCD active errors
- Legal Values
- Integer values from 0 to 65535.
- Default Value
- 0
- Write Privilege
- Server Control and Configuration
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- Yes
- Notes
- The System.LCD get and set commands work on iDRAC on Blade Server, even if the LCD is not present on the server.
- You can change the LCD group attributes for monolithic servers even if the LCD is not present on servers.
System.LCD.NumberErrsVisible (Read Only)
- Display Name
- Number of errors visible
- Description
- The number of visible LCD active errors
- Legal Values
- Integer values from 0 to 65535.
- Default Value
- 0
- Write Privilege
- Server Control and Configuration
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- Yes
- Notes
- The System.LCD get and set commands work on iDRAC on Blade Server, even if the LCD is not present on the server.
- You can change the LCD group attributes for monolithic servers even if the LCD is not present on servers.
System.LCD.QualifierTemp (Read or Write)
- Display Name
- Ambient Temperature Qualifier
- Description
- Specifies Ambient Temperature Qualifier
- Legal Values
- C - 0
- F - 1
- Default Value
- 0
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- Yes
- Notes
- The System.LCD get and set commands work on iDRAC on Blade Server, even if the LCD is not present on the server.
- You can change the LCD group attributes for monolithic servers even if the LCD is not present on servers.
System.LCD.QualifierWatt (Read or Write)
- Display Name
- System Watt Qualifier
- Description
- Specifies System Watt Qualifier
- Legal Values
- Watts - 0
- BTU/hr - 1
- Default Value
- 0
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- Yes
- Notes
- The System.LCD get and set commands work on iDRAC on Blade Server, even if the LCD is not present on the server.
- You can change the LCD group attributes for monolithic servers even if the LCD is not present on servers.
System.LCD.UserDefinedString (Read or Write)
- Display Name
- User Defined String for LCD
- Description
- User defined custom string for display on LCD
- Legal Values
- String of up to 62 ASCII characters.
- Default Value
- None
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- System.LCD.Configuration has to be set to User Defined mode
- Is Platform Dependent
- Yes
- Notes
- The System.LCD get and set commands work on iDRAC on Blade Server, even if the LCD is not present on the server.
- You can change the LCD group attributes for monolithic servers even if the LCD is not present on servers.
System.LCD.vConsoleIndication (Read or Write)
- Display Name
- vConsole Indication
- Description
- Virtual Console Indication
- Legal Values
- Disabled - 0
- Enabled - 1
- Default Value
- 1
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- Yes
- Notes
- The System.LCD get and set commands work on iDRAC on Blade Server, even if the LCD is not present on the server.
- You can change the LCD group attributes for monolithic servers even if the LCD is not present on servers.
System.LeaseInfo.Buyout (Read or Write)
- Display Name
- Buyout Amount
- Description
- Indicates the amount of money you would have to pay to own a system you are leasing.
- Legal Values
- String of up to 32 ASCII characters.
- Default Value
- 0
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.LeaseInfo.EndDate (Read or Write)
- Display Name
- End Date
- Description
- Displays the agreed upon day, month, and year that the lease is no longer in force.
- Legal Values
- String of up to 32 ASCII characters.
- Default Value
- None
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.LeaseInfo.FairValue (Read or Write)
- Display Name
- Fair Market Value
- Description
- Refers to an arrangement that allows a customer to purchase systems at the end of the lease for its then current fair market value.
- Legal Values
- String of up to 32 ASCII characters.
- Default Value
- 0
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.LeaseInfo.Lessor (Read or Write)
- Display Name
- Lessor
- Description
- Displays the name of the business entity that is leasing the system to the user.
- Legal Values
- String of up to 64 ASCII characters.
- Default Value
- None
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.LeaseInfo.MultiSched (Read or Write)
- Display Name
- Multiple Schedules
- Description
- Indicates whether the cost of leasing the system is computed by more than one rate schedule.
- Legal Values
- Yes - 0
- No - 1
- Default Value
- 1
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.LeaseInfo.RateFactor (Read or Write)
- Display Name
- Rate Factor
- Description
- Displays the factor used to calculate the lease payment.
- Legal Values
- String of up to 32 ASCII characters.
- Default Value
- 0
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.MaintenanceInfo.EndDate (Read or Write)
- Display Name
- End Date
- Description
- The date that maintenance ends.
- Legal Values
- String of up to 32 ASCII characters.
- Default Value
- None
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.MaintenanceInfo.Provider (Read or Write)
- Display Name
- Provider
- Description
- The business entity that provides maintenance on a system.
- Legal Values
- String of up to 64 ASCII characters.
- Default Value
- None
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.MaintenanceInfo.Restrictions (Read or Write)
- Display Name
- Restrictions
- Description
- Any exclusions that apply to the maintenance agreement for the system.
- Legal Values
- String of up to 64 ASCII characters.
- Default Value
- None
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.MaintenanceInfo.StartDate (Read or Write)
- Display Name
- Start Date
- Description
- The date that maintenance begins.
- Legal Values
- String of up to 32 ASCII characters.
- Default Value
- None
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.OpenIDConnectServer.DiscoveryURL (Read or Write)
- Display Name
- Server Discovery URL
- Description
- Discovery URL
- Legal Values
- String of up to 1024 ASCII characters.
- Default Value
- None
- Write Privilege
- Configure iDRAC, Configure Users
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- Yes
System.OpenIDConnectServer.Enabled (Read or Write)
- Display Name
- Server is enabled
- Description
- Server state
- Legal Values
- Disabled - 0
- Enabled - 1
- Default Value
- 0
- Write Privilege
- Configure iDRAC, Configure Users
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- Yes
System.OpenIDConnectServer.Name (Read or Write)
- Display Name
- Server Name
- Description
- Server name
- Legal Values
- String of up to 128 ASCII characters.
- Default Value
- None
- Write Privilege
- Configure iDRAC, Configure Users
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- Yes
System.OpenIDConnectServer.RegistrationDetails (Read or Write)
- Display Name
- Credentials needed to register on server
- Description
- Registration details
- Legal Values
- String of up to 1024 ASCII characters.
- Default Value
- None
- Write Privilege
- Configure iDRAC, Configure Users
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- Yes
System.OpenIDConnectServer.RegistrationStatus (Read Only)
- Display Name
- Status of registration on server
- Description
- Registration status
- Legal Values
- String of up to 1024 ASCII characters.
- Default Value
- None
- Write Privilege
- Configure iDRAC, Configure Users
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- Yes
System.OutsourceInfo.ProbComp (Read or Write)
- Display Name
- Problem Component
- Description
- Component of the system that requires corrective action such as repair or replacement.
- Legal Values
- String of up to 64 ASCII characters.
- Default Value
- None
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.OutsourceInfo.ProviderFee (Read or Write)
- Display Name
- Provider Fee
- Description
- Defines any additional fee invoiced by the outsource service provider.
- Legal Values
- String of up to 32 ASCII characters.
- Default Value
- 0
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.OutsourceInfo.SLALevel (Read or Write)
- Display Name
- SLA Level
- Description
- Service Level Agreement (SLA) between the service provider and the system owner spells out when service is available (for example, how many hours and days per week) and what components are excluded. Levels of service to which the system owner is entitled.
- Legal Values
- String of up to 64 ASCII characters.
- Default Value
- None
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.OutsourceInfo.ServiceFee (Read or Write)
- Display Name
- Service Fee
- Description
- Amount of money paid for either the service contract or for corrective action on a specific problem component.
- Legal Values
- String of up to 32 ASCII characters.
- Default Value
- 0
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.OutsourceInfo.SignedFor (Read or Write)
- Display Name
- Signed For
- Description
- Person who authorized the repair of the component.
- Legal Values
- String of up to 64 ASCII characters.
- Default Value
- None
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.OwnerInfo.InsComp (Read or Write)
- Display Name
- Insurance Company
- Description
- The company that insures the system against theft or other loss.
- Legal Values
- String of up to 64 ASCII characters.
- Default Value
- None
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.OwnerInfo.OwnerName (Read or Write)
- Display Name
- Owner Name
- Description
- The individual or business entity that holds legal title to the system.
- Legal Values
- String of up to 64 ASCII characters.
- Default Value
- None
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.OwnerInfo.Type (Read or Write)
- Display Name
- Type
- Description
- Whether the system is owned or leased.
- Legal Values
- Owned - 0
- Leased - 1
- Default Value
- 0
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.PCIeSlotLFM.3rdPartyCard (Read Only)
- Display Name
- 3rd Party Card
- Description
- 3rd Party PCIe Card may benefit from additional settings
- Legal Values
- No - 0
- Yes - 1
- N/A - 2
- Default Value
- 2
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.PCIeSlotLFM.CardType (Read Only)
- Display Name
- Card Type
- Description
- Type of PCIe card installed
- Legal Values
- String of up to 512 ASCII characters.
- Default Value
- None
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.PCIeSlotLFM.CustomLFM (Read or Write)
- Display Name
- Custom LFM
- Description
- Minimum airflow to be delivered the installed PCIe card
- Legal Values
- Integer values from 0 to 5000.
- Default Value
- 0
- Write Privilege
- Configure iDRAC
- License Required
- Express License
- Dependency
- CustomLFM is read/write when LFMMode is set to custom
- Is Platform Dependent
- No
System.PCIeSlotLFM.LFMMode (Read or Write)
- Display Name
- LFM Mode
- Description
- Cooling Response Mode
- Legal Values
- Automatic - 0
- Disabled - 1
- Custom - 2
- Default Value
- 0
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- LFMMode is read/write when 3rdPartyCard is set to Yes
- Is Platform Dependent
- No
System.PCIeSlotLFM.MaxLFM (Read Only)
- Display Name
- Maximum LFM
- Description
- Estimated airflow delivered to the slot at full fan speed
- Legal Values
- Integer values from 0 to 65536.
- Default Value
- 0
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.PCIeSlotLFM.PCIeInletTemperature (Read Only)
- Display Name
- PCIe Inlet Temperature
- Description
- Indicates the current PCIe Inlet Temperature for the PCIe Slot.
- Legal Values
- Integer values from 0 to 127.
- Default Value
- 0
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.PCIeSlotLFM.SlotState (Read Only)
- Display Name
- Slot State
- Description
- PCIe slot physically exists
- Legal Values
- Not-Defined - 0
- Defined - 1
- Default Value
- 0
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.PCIeSlotLFM.TargetLFM (Read Only)
- Display Name
- Target LFM
- Description
- Minimum airflow provisioned for the installed PCIe card
- Legal Values
- String of up to 512 ASCII characters.
- Default Value
- -
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.QuickSync.Access (Read or Write)
- Display Name
- Quick Sync Access
- Description
- Sets QuickSync access permission
- Legal Values
- Disabled - 0
- Read-only - 1
- Read-write - 2
- Default Value
- 2
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- System.QuickSync.Presence has to be Absent or Present
- Is Platform Dependent
- Yes
System.QuickSync.InactivityTimeout (Read or Write)
- Display Name
- Quick Sync Inactivity Timeout
- Description
- Quick Sync Inactivity Timeout value specified in seconds with max value of 3600 seconds
- Legal Values
- Integer values from 120 to 3600.
- Default Value
- 120
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- Cannot be set unless InactivityTimerEnable is Enabled
- Is Platform Dependent
- Yes
System.QuickSync.InactivityTimerEnable (Read or Write)
- Display Name
- Quick Sync Inactivity Timer Enable
- Description
- Enables or disables the QuickSync inactivity timer
- Legal Values
- Disabled - 0
- Enabled - 1
- Default Value
- 1
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- System.QuickSync.Presence has to be Absent or Present
- Is Platform Dependent
- Yes
System.QuickSync.Presence (Read Only)
- Display Name
- Quick Sync Presence
- Description
- Indicates the presence or absence of the QuickSync hardware
- Legal Values
- Not Supported - 0
- Absent - 1
- Present - 2
- Default Value
- 0
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- System.QuickSync.Presence has to be Absent or Present
- Is Platform Dependent
- Yes
System.QuickSync.ReadAuthentication (Read or Write)
- Display Name
- Quick Sync Read Authentication
- Description
- Enables or disables QuickSync read authentication to the server
- Legal Values
- Disabled - 0
- Enabled - 1
- Default Value
- 1
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- System.QuickSync.Presence has to be Absent or Present
- Is Platform Dependent
- Yes
System.QuickSync.WifiEnable (Read or Write)
- Display Name
- Quick Sync WiFi Enable
- Description
- Enables or disables QuickSync WiFi access
- Legal Values
- Disabled - 0
- Enabled - 1
- Default Value
- 1
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- System.QuickSync.Presence has to be Absent or Present
- Is Platform Dependent
- Yes
System.SC-BMC.PowerMonitoring (Read or Write)
- Display Name
- Power Monitoring
- Description
- Power monitoring
- Legal Values
- Integer values from 0 to 1.
- Default Value
- 0
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- Yes
- Notes
- The System.Chassis group is deprecated and replaced with System.SC-BMC group.
System.ServerInfo.NodeID (Read Only)
- Display Name
- System Node ID
- Description
- Specifies the system node ID.
- Legal Values
- String of up to 124 ASCII characters.
- Default Value
- None
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.ServerInfo.RChassisServiceTag (Read Only)
- Display Name
- System Chassis-related Service Tag
- Description
- Provides the system chassis-related service tag.
- Legal Values
- String of up to 10 ASCII characters.
- Default Value
- None
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.ServerInfo.ServerType (Read Only)
- Display Name
- Server Type
- Description
- The type of physical form factor of the Server
- Legal Values
- Rack - 0
- Blade - 1
- Tower - 2
- Sled - 3
- Default Value
- 0
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- Yes
System.ServerInfo.ServiceTag (Read Only)
- Display Name
- Service Tag
- Description
- Specifies the system service tag.
- Legal Values
- String of up to 64 ASCII characters.
- Default Value
- None
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.ServerOS.HostName (Read or Write)
- Display Name
- Server Host Name
- Description
- Server Host Name
- Legal Values
- String of up to 253 ASCII characters.
- Default Value
- None
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
- Notes
- system.serveros.productkey value is shown only if OA3.x is available, which may be available with future generations of MSFT and newer version of Windows Server OS.
System.ServerOS.InstallCompletedTime (Read Only)
- Display Name
- OS Installation Completed Time
- Description
- Indicates the time when the Host OS installation Completed (seconds).
- Legal Values
- String of up to 32 ASCII characters.
- Default Value
- None
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
- Notes
- system.serveros.productkey value is shown only if OA3.x is available, which may be available with future generations of MSFT and newer version of Windows Server OS.
System.ServerOS.OEMOSVersion (Read Only)
- Display Name
- OEM OS Version
- Description
- Server OEM OS Version
- Legal Values
- String of up to 254 ASCII characters.
- Default Value
- None
- Write Privilege
- Server Control and Configuration
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
- Notes
- system.serveros.productkey value is shown only if OA3.x is available, which may be available with future generations of MSFT and newer version of Windows Server OS.
System.ServerOS.OSName (Read or Write)
- Display Name
- OS Name
- Description
- Server Operating System
- Legal Values
- String of up to 254 ASCII characters.
- Default Value
- None
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
- Notes
- system.serveros.productkey value is shown only if OA3.x is available, which may be available with future generations of MSFT and newer version of Windows Server OS.
System.ServerOS.OSVersion (Read Only)
- Display Name
- OS Version
- Description
- Server OS Version
- Legal Values
- String of up to 254 ASCII characters.
- Default Value
- None
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
- Notes
- system.serveros.productkey value is shown only if OA3.x is available, which may be available with future generations of MSFT and newer version of Windows Server OS.
System.ServerOS.ProductKey (Read Only)
- Display Name
- Windows Product Key
- Description
- Windows OS Product Key associated with the server
- Legal Values
- String of up to 32 ASCII characters.
- Default Value
- None
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
- Notes
- system.serveros.productkey value is shown only if OA3.x is available, which may be available with future generations of MSFT and newer version of Windows Server OS.
System.ServerOS.ServerPoweredOnTime (Read Only)
- Display Name
- Server Powered On Time Duration
- Description
- Indicates the time since the Host OS has been powered on ( seconds ).
- Legal Values
- Integer values from 0 to 2147483647.
- Default Value
- 0
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
- Notes
- system.serveros.productkey value is shown only if OA3.x is available, which may be available with future generations of MSFT and newer version of Windows Server OS.
System.ServerPwr.ActivePolicyName (Read Only)
- Display Name
- Active Power Cap Policy Name
- Description
- The active power cap policy name
- Legal Values
- String of up to 128 ASCII characters.
- Default Value
- None
- Write Privilege
- Configure iDRAC
- License Required
- Enterprise License
- Dependency
- None
- Is Platform Dependent
- Yes
- Notes
- For Dell PowerEdge FM120x4 server with more than one iDRAC, the power is received and shared from CMC. Hence, the information about power and temperature for individual iDRACs are not displayed.
System.ServerPwr.ActivePowerCapVal (Read Only)
- Display Name
- Active Power Cap Value
- Description
- Set the Active Power Cap value
- Legal Values
- Integer values from 0 to 32767.
- Default Value
- 32767
- Write Privilege
- Configure iDRAC
- License Required
- Enterprise License
- Dependency
- None
- Is Platform Dependent
- Yes
- Notes
- For Dell PowerEdge FM120x4 server with more than one iDRAC, the power is received and shared from CMC. Hence, the information about power and temperature for individual iDRACs are not displayed.
System.ServerPwr.PSPFCEnabled (Read or Write)
- Display Name
- Power Supply PFC Enable
- Description
- Enable the Power Supply Power Factor Correction
- Legal Values
- Disabled - 0
- Enabled - 1
- Default Value
- 0
- Write Privilege
- Configure iDRAC
- License Required
- Express License
- Dependency
- None
- Is Platform Dependent
- Yes
- Notes
- For Dell PowerEdge FM120x4 server with more than one iDRAC, the power is received and shared from CMC. Hence, the information about power and temperature for individual iDRACs are not displayed.
System.ServerPwr.PSRapidOn (Read or Write)
- Display Name
- Power Supply Rapid On Enable
- Description
- Enable the Power Supply Rapid On. Rapid On is exactly same as Hotspare as listed in idrac GUI.
- Legal Values
- Disabled - 0
- Enabled - 1
- Default Value
- 1
- Write Privilege
- Configure iDRAC
- License Required
- Express License
- Dependency
- None
- Is Platform Dependent
- Yes
- Notes
- For Dell PowerEdge FM120x4 server with more than one iDRAC, the power is received and shared from CMC. Hence, the information about power and temperature for individual iDRACs are not displayed.
System.ServerPwr.PSRedPolicy (Read or Write)
- Display Name
- Power Supply Redundancy Policy
- Description
- Specify the Power Supply redundancy policy
- Legal Values
- Not Redundant - 0
- A/B Grid Redundant - 1
- Default Value
- 0
- Write Privilege
- Configure iDRAC
- License Required
- Express License
- Dependency
- None
- Is Platform Dependent
- Yes
- Notes
- For Dell PowerEdge FM120x4 server with more than one iDRAC, the power is received and shared from CMC. Hence, the information about power and temperature for individual iDRACs are not displayed.
System.ServerPwr.PowerCapMaxThres (Read Only)
- Display Name
- Power Cap Max Threshold
- Description
- Maximum threshold for Power Cap
- Legal Values
- Integer values from 0 to 32767.
- Default Value
- 32767
- Write Privilege
- Configure iDRAC
- License Required
- Enterprise License
- Dependency
- None
- Is Platform Dependent
- Yes
- Notes
- For Dell PowerEdge FM120x4 server with more than one iDRAC, the power is received and shared from CMC. Hence, the information about power and temperature for individual iDRACs are not displayed.
System.ServerPwr.PowerCapMinThres (Read Only)
- Display Name
- Power Cap Min Threshold
- Description
- Minimum threshold for Power Cap
- Legal Values
- Integer values from 0 to 32767.
- Default Value
- 0
- Write Privilege
- Configure iDRAC
- License Required
- Enterprise License
- Dependency
- None
- Is Platform Dependent
- Yes
- Notes
- For Dell PowerEdge FM120x4 server with more than one iDRAC, the power is received and shared from CMC. Hence, the information about power and temperature for individual iDRACs are not displayed.
System.ServerPwr.PowerCapSetting (Read or Write)
- Display Name
- Power Cap Setting
- Description
- Enables or Disables setting the power cap value
- Legal Values
- Disabled - 0
- Enabled - 1
- Default Value
- 0
- Write Privilege
- Configure iDRAC
- License Required
- Enterprise License
- Dependency
- None
- Is Platform Dependent
- Yes
- Notes
- For Dell PowerEdge FM120x4 server with more than one iDRAC, the power is received and shared from CMC. Hence, the information about power and temperature for individual iDRACs are not displayed.
System.ServerPwr.PowerCapValue (Read or Write)
- Display Name
- Power Cap Value
- Description
- Indicates maximum power consumption limit in Watts
- Legal Values
- Integer values from 0 to 32767.
- Default Value
- 32767
- Write Privilege
- Configure iDRAC
- License Required
- Enterprise License
- Dependency
- None
- Is Platform Dependent
- Yes
- Notes
- For Dell PowerEdge FM120x4 server with more than one iDRAC, the power is received and shared from CMC. Hence, the information about power and temperature for individual iDRACs are not displayed.
System.ServerPwr.Poweredbyparent (Read or Write)
- Display Name
- Powered By Parent
- Description
- Gives info on whether it is Self Powered or Powered By Chassis
- Legal Values
- SelfPowered - 0
- PoweredByChassis - 1
- Default Value
- 0
- Write Privilege
- Server Control and Configuration
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
- Notes
- For Dell PowerEdge FM120x4 server with more than one iDRAC, the power is received and shared from CMC. Hence, the information about power and temperature for individual iDRACs are not displayed.
System.ServerPwr.RapidOnPrimaryPSU (Read or Write)
- Display Name
- Rapid On Primary PSU
- Description
- The Rapid On Primary PSU
- Legal Values
- PSU1 - 1
- PSU2 - 2
- Default Value
- 1
- Write Privilege
- Configure iDRAC
- License Required
- Express License
- Dependency
- None
- Is Platform Dependent
- Yes
- Notes
- For Dell PowerEdge FM120x4 server with more than one iDRAC, the power is received and shared from CMC. Hence, the information about power and temperature for individual iDRACs are not displayed.
System.ServerPwrMon.AccumulativePower (Read Only)
- Display Name
- Accumulative Power
- Description
- Total power in energy consumed by server from start time.
- Legal Values
- Integer values from 0 to 2147483647.
- Default Value
- 0
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.ServerPwrMon.CumulativePowerStartTime (Read Only)
- Display Name
- Cumulative Power Start Time
- Description
- Start of time period from which cumulative power is calculated.
- Legal Values
- Integer values from 0 to 2147483647.
- Default Value
- 0
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.ServerPwrMon.CumulativePowerStartTimeStr (Read Only)
- Display Name
- Cumulative Power Start Time
- Description
- The start time when cumulative power is recorded.
- Legal Values
- String of up to 128 ASCII characters.
- Default Value
- 0
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.ServerPwrMon.MinPowerTime (Read Only)
- Display Name
- Minimum Power Time
- Description
- The time when minimum power is recorded.
- Legal Values
- Integer values from 0 to 2147483647.
- Default Value
- 0
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.ServerPwrMon.MinPowerTimeStr (Read Only)
- Display Name
- Minimum Power Time
- Description
- The time when minimum power is recorded.
- Legal Values
- String of up to 128 ASCII characters.
- Default Value
- 0
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.ServerPwrMon.MinPowerWatts (Read Only)
- Display Name
- Minimum Power Watts
- Description
- Minimum Power Historical
- Legal Values
- Integer values from 0 to 65553.
- Default Value
- 65553
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.ServerPwrMon.PeakCurrentTime (Read Only)
- Display Name
- Peak Current Time
- Description
- Time at which the server observed the maximum current from start time.
- Legal Values
- Integer values from 0 to 2147483647.
- Default Value
- 0
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.ServerPwrMon.PeakCurrentTimeStr (Read Only)
- Display Name
- Peak Current Time
- Description
- The time when peak current is recorded.
- Legal Values
- String of up to 128 ASCII characters.
- Default Value
- 0
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.ServerPwrMon.PeakPowerStartTime (Read Only)
- Display Name
- Peak Power Start Time
- Description
- Start of time period for which peak power is recorded.
- Legal Values
- Integer values from 0 to 2147483647.
- Default Value
- 0
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.ServerPwrMon.PeakPowerStartTimeStr (Read Only)
- Display Name
- Peak Power Start Time
- Description
- The start time when peak power is recorded.
- Legal Values
- String of up to 128 ASCII characters.
- Default Value
- 0
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.ServerPwrMon.PeakPowerTime (Read Only)
- Display Name
- Peak Power Time
- Description
- Time at which the server consumed the maximum power from start time.
- Legal Values
- Integer values from 0 to 2147483647.
- Default Value
- 0
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.ServerPwrMon.PeakPowerTimeStr (Read Only)
- Display Name
- Peak Power Time
- Description
- The time when peak power is recorded.
- Legal Values
- String of up to 128 ASCII characters.
- Default Value
- 0
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.ServerPwrMon.PeakPowerWatts (Read Only)
- Display Name
- Peak Power Watts
- Description
- Maximum power consumed by server from the start time.
- Legal Values
- Integer values from 0 to 32767.
- Default Value
- 0
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.ServerPwrMon.PowerConfigReset (Read or Write)
- Display Name
- Power Config Data Reset
- Description
- Resets the power statistics starting time. (Write only).
- Legal Values
- None - 0
- ClrCumulaPowerAndTime - 1
- ClrPeaKValueAndTIme - 2
- ClrAll - 3
- ClrPeakAndCumulaValue - 4
- Default Value
- 0
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- Yes
System.ServerTopology.AisleName (Read or Write)
- Display Name
- Aisle Name
- Description
- The aisle the system is located in.
- Legal Values
- String of up to 128 ASCII characters.
- Default Value
- None
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
- Notes
- The System.Location group is deprecated and replaced with System.ServerTopology group.
System.ServerTopology.DataCenterName (Read or Write)
- Display Name
- Data Center Name
- Description
- The data center the system is located in.
- Legal Values
- String of up to 128 ASCII characters.
- Default Value
- None
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
- Notes
- The System.Location group is deprecated and replaced with System.ServerTopology group.
System.ServerTopology.ManagedSystemSizeInU (Read Only)
- Display Name
- Size of Managed System in U
- Description
- Measure of thickness of the system in U
- Legal Values
- 1 - 1
- 2 - 2
- 3 - 3
- 4 - 4
- 5 - 5
- 6 - 6
- 7 - 7
- 8 - 8
- 9 - 9
- 10 - 10
- 1.5 - 11
- 2.5 - 12
- 3.5 - 13
- 4.5 - 14
- 5.5 - 15
- 6.5 - 16
- 7.5 - 17
- 8.5 - 18
- 9.5 - 19
- Default Value
- 1
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- Yes
- Notes
- The System.Location group is deprecated and replaced with System.ServerTopology group.
System.ServerTopology.RackName (Read or Write)
- Display Name
- Rack Name
- Description
- Name of the rack on which the system is located.
- Legal Values
- String of up to 128 ASCII characters.
- Default Value
- None
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
- Notes
- The System.Location group is deprecated and replaced with System.ServerTopology group.
System.ServerTopology.RackOffsetUnits (Read or Write)
- Display Name
- Rack Offset Units
- Description
- Indicates the type of Rack Units in use.
- Legal Values
- OpenU - 0
- EIA_310 - 1
- Default Value
- 1
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
- Notes
- The System.Location group is deprecated and replaced with System.ServerTopology group.
System.ServerTopology.RackSlot (Read or Write)
- Display Name
- Rack Slot
- Description
- Slot in the rack where the system is located.
- Legal Values
- Integer values from 0 to 255.
- Default Value
- 0
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
- Notes
- The System.Location group is deprecated and replaced with System.ServerTopology group.
System.ServerTopology.RoomName (Read or Write)
- Display Name
- Room Name
- Description
- Room Name
- Legal Values
- String of up to 128 ASCII characters.
- Default Value
- None
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
- Notes
- The System.Location group is deprecated and replaced with System.ServerTopology group.
System.ServerTopology.SizeOfManagedSystemInU (Read Only)
- Display Name
- Size of Managed System in U
- Description
- Measure of thickness of the system in U
- Legal Values
- Integer values from 1 to 255.
- Default Value
- 1
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- Yes
- Notes
- The System.Location group is deprecated and replaced with System.ServerTopology group.
System.ServiceContract.Renewed (Read or Write)
- Display Name
- Renewed
- Description
- Whether the service contract was renewed or not (Yes or No).
- Legal Values
- Yes - 0
- No - 1
- Default Value
- 1
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.ServiceContract.Type (Read or Write)
- Display Name
- Type
- Description
- Type refers to the name or feature of the system covered by the service contract. For example, Installation Service, Maintenance Service, Return Service, Gold Service, Premier Service.
- Legal Values
- String of up to 64 ASCII characters.
- Default Value
- None
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.ServiceContract.Vendor (Read or Write)
- Display Name
- Vendor
- Description
- The business entity contracting to service the system.
- Legal Values
- String of up to 64 ASCII characters.
- Default Value
- None
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.Storage.AvailableSpareAlertThreshold (Read or Write)
- Display Name
- AvailableSpareAlertThreshold
- Description
- Displays the system level user configured threshold value for available spare value of the SSD devices connected to system.
- Legal Values
- Integer values from 1 to 99.
- Default Value
- 10
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.Storage.RemainingRatedWriteEnduranceAlertThreshold (Read or Write)
- Display Name
- RemainingRatedWriteEnduranceAlertThreshold
- Description
- Displays the system level user configured threshold value for write endurance value of the SSD devices connected to system.
- Legal Values
- Integer values from 1 to 99.
- Default Value
- 10
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.SupportInfo.AutoFix (Read or Write)
- Display Name
- Automatic Fix
- Description
- Method used to fix the problem
- Legal Values
- String of up to 64 ASCII characters.
- Default Value
- None
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.SupportInfo.HelpDesk (Read or Write)
- Display Name
- Help Desk
- Description
- Name of the help desk that provides technical support for your system; information provided by the help desk.
- Legal Values
- String of up to 64 ASCII characters.
- Default Value
- None
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.SupportInfo.Outsourced (Read or Write)
- Display Name
- Outsourced
- Description
- Indicates whether you have contracted with an outside business entity to provide technical support for your system.
- Legal Values
- Yes - 0
- No - 1
- Default Value
- 1
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.SupportInfo.Type (Read or Write)
- Display Name
- Type
- Description
- Indicates whether a support request is for a problem with your systems network connectivity or with a particular system component.
- Legal Values
- Network - 0
- Storage - 1
- Default Value
- 0
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.SystemInfo.BootTime (Read Only)
- Display Name
- System Boot Time
- Description
- Time of the last system boot.
- Legal Values
- String of up to 64 ASCII characters.
- Default Value
- None
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.SystemInfo.PrimaryTelephone (Read or Write)
- Display Name
- Primary Telephone
- Description
- Telephone number for the person responsible for managing the system.
- Legal Values
- String of up to 64 ASCII characters.
- Default Value
- None
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.SystemInfo.PrimaryUser (Read or Write)
- Display Name
- Primary User
- Description
- Text that provides the name for the person responsible for managing the system.
- Legal Values
- String of up to 64 ASCII characters.
- Default Value
- None
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.SystemInfo.SysLocation (Read or Write)
- Display Name
- System Location
- Description
- Alphanumeric text that specifies where the system is, such as building and room.
- Legal Values
- String of up to 64 ASCII characters.
- Default Value
- None
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.SystemInfo.SysTime (Read Only)
- Display Name
- System Time
- Description
- Current time configured on the system clock.
- Legal Values
- String of up to 64 ASCII characters.
- Default Value
- None
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.ThermalConfig.ASHRAEEnvironmentalClass (Read Only)
- Display Name
- ASHRAE Environmental Class
- Description
- Defines the supported ASHRAE Environmental Class for the system.
- Legal Values
- N/A - 0
- A2 - 1
- A3 - 2
- A4 - 3
- Default Value
- 0
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.ThermalConfig.CriticalEventGenerationInterval (Read or Write)
- Display Name
- Critical Event Generation Interval
- Description
- Indicates time interval in days for critical events to be generated
- Legal Values
- Integer values from 0 to 365.
- Default Value
- 30
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.ThermalConfig.EventGenerationInterval (Read or Write)
- Display Name
- Event Generation Interval
- Description
- Indicates time interval in days for warning events to be generated
- Legal Values
- Integer values from 0 to 365.
- Default Value
- 30
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.ThermalConfig.FreshAirCompliantConfiguration (Read Only)
- Display Name
- Fresh Air Compliant Configuration
- Description
- Indicates if the system is a Fresh Air compliant configuration
- Legal Values
- Not Applicable - 0
- Yes - 1
- No - 2
- Default Value
- 1
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
iDRAC.ThermalConfig.LiquidCoolLeakPowerOnPolicy (Read or Write)
- Display Name
- Liquid Cooling Leak Power On Policy
- Description
- Configures system power on behavior with liquid cooling leak present
- Legal Values
-
- BLOCK_IN_S5 - 0
- Default Value
- 0
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- Yes
System.ThermalConfig.LiquidCoolSetting (Read Only)
- Display Name
- Liquid Cool Setting
- Description
- Specifies the Liquid Cooling Setting.
- Legal Values
- Disabled - 0
- Enabled - 1
- Unknown - 255
- Default Value
- 255
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.ThermalConfig.MaxCFM (Read Only)
- Display Name
- Maximum CFM
- Description
- Indicates potential system airflow consumption at 100% fan speed - in cubic feet per minute (CFM)
- Legal Values
- Integer values from 0 to 1000.
- Default Value
- 0
- Write Privilege
- N/A
- License Required
- Not Applicable
- Dependency
- Not shown if system.embedded.1#thermalsettings.1#systemCFMsupport is not supported.
- Is Platform Dependent
- No
System.ThermalConfig.ValidFanConfiguration (Read Only)
- Display Name
- Valid Fan Configuration
- Description
- Valid Fan Configuration
- Legal Values
- No - 0
- Yes - 1
- NotApplicable - 2
- Default Value
- 2
- Write Privilege
- Server Control and Configuration
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.ThermalHistorical.IntervalInSeconds (Read or Write)
- Display Name
- Interval In Seconds
- Description
- Specifies the time resolution
- Legal Values
- Integer values from 0 to 0.
- Default Value
- 0
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.ThermalSettings.AirExhaustTemp (Read or Write)
- Display Name
- Average Air Exhaust Temperature
- Description
- Specifies the Average Air Exhaust Temperature
- Legal Values
- 40 - 0
- 45 - 1
- 50 - 2
- 55 - 3
- 60 - 4
- 65 - 5
- 70 - 255
- Default Value
- 255
- Write Privilege
- Configure iDRAC
- License Required
- Express License
- Dependency
- Feature must be supported to set the value.
- Is Platform Dependent
- Yes
- Notes
- You may encounter an error when running an operation with attributes requiring iDRAC Datacenter license, on a system without this required license.
System.ThermalSettings.AirExhaustTempSupport (Read Only)
- Display Name
- Air Exhaust Temp Support
- Description
- Specifies if the Average Air Exhaust Temperature is supported
- Legal Values
- Not Supported - 0
- Supported - 1
- Default Value
- 0
- Write Privilege
- Server Control and Configuration
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
- Notes
- You may encounter an error when running an operation with attributes requiring iDRAC Datacenter license, on a system without this required license.
System.ThermalSettings.AirTemperatureRiseLimit (Read or Write)
- Display Name
- Air Temperature Rise Limit
- Description
- Defines the Air Temperature Rise Limit
- Legal Values
- 15 - 0
- 20 - 1
- 25 - 2
- 30 - 3
- 35 - 4
- 40 - 5
- 45 - 6
- NO LIMIT - 255
- Default Value
- 255
- Write Privilege
- Configure iDRAC
- License Required
- Datacenter License
- Dependency
- Feature must be supported to set the value.
- Is Platform Dependent
- No
- Notes
- You may encounter an error when running an operation with attributes requiring iDRAC Datacenter license, on a system without this required license.
System.ThermalSettings.AirTemperatureRiseLimitSupport (Read Only)
- Display Name
- Air Temperature Rise Limit Support
- Description
- Defines if the Air Temperature Rise Limit configuration is supported
- Legal Values
- Not Supported - 0
- Supported - 1
- Default Value
- 0
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
- Notes
- You may encounter an error when running an operation with attributes requiring iDRAC Datacenter license, on a system without this required license.
System.ThermalSettings.CurrentSystemProfileValue (Read Only)
- Display Name
- Current System Profile Value
- Description
- Displays current system profile value
- Legal Values
- String of up to 32 ASCII characters.
- Default Value
- None
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
- Notes
- You may encounter an error when running an operation with attributes requiring iDRAC Datacenter license, on a system without this required license.
System.ThermalSettings.DriveTemperaturePolling (Read or Write)
- Display Name
- Drive Temperature Polling
- Description
- Specifies if drive temperature polling is enabled, disabled, or set to default for drives attached to an HBA.
- Legal Values
- Default - 0
- Enabled - 1
- Disabled - 2
- Default Value
- 0
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- Yes
- Notes
- You may encounter an error when running an operation with attributes requiring iDRAC Datacenter license, on a system without this required license.
System.ThermalSettings.FanSpeedHighOffsetVal (Read Only)
- Display Name
- Fan Speed High Offset Value
- Description
- Specifies the Fan Speed High Offset Value
- Legal Values
- Integer values from 0 to 65535.
- Default Value
- 0
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
- Notes
- You may encounter an error when running an operation with attributes requiring iDRAC Datacenter license, on a system without this required license.
System.ThermalSettings.FanSpeedLowOffsetVal (Read Only)
- Display Name
- Fan Speed Low Offset Value
- Description
- Specifies the Fan Speed Low Offset Value
- Legal Values
- Integer values from 0 to 65535.
- Default Value
- 0
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
- Notes
- You may encounter an error when running an operation with attributes requiring iDRAC Datacenter license, on a system without this required license.
System.ThermalSettings.FanSpeedMaxOffsetVal (Read Only)
- Display Name
- Fan Speed Max Offset Value
- Description
- Specifies the Fan Speed Max Offset Value
- Legal Values
- Integer values from 0 to 65535.
- Default Value
- 0
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
- Notes
- You may encounter an error when running an operation with attributes requiring iDRAC Datacenter license, on a system without this required license.
System.ThermalSettings.FanSpeedMediumOffsetVal (Read Only)
- Display Name
- Fan Speed Medium Offset Value
- Description
- Specifies the Fan Speed Medium Offset Value
- Legal Values
- Integer values from 0 to 65535.
- Default Value
- 0
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
- Notes
- You may encounter an error when running an operation with attributes requiring iDRAC Datacenter license, on a system without this required license.
System.ThermalSettings.FanSpeedOffset (Read or Write)
- Display Name
- Fan Speed Offset
- Description
- Specifies the Fan Speed Offset
- Legal Values
- Low - 0
- High - 1
- Medium - 2
- Max - 3
- Off - 255
- Default Value
- 255
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
- Notes
- You may encounter an error when running an operation with attributes requiring iDRAC Datacenter license, on a system without this required license.
System.ThermalSettings.MFSMaximumLimit (Read Only)
- Display Name
- MFS Maximum Limit
- Description
- Specifies the MFS Maximum Limit
- Legal Values
- Integer values from 0 to 100.
- Default Value
- 100
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
- Notes
- You may encounter an error when running an operation with attributes requiring iDRAC Datacenter license, on a system without this required license.
System.ThermalSettings.MFSMinimumLimit (Read Only)
- Display Name
- MFS Minimum Limit
- Description
- Specifies the MFS Minimum Limit
- Legal Values
- Integer values from 0 to 100.
- Default Value
- 0
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
- Notes
- You may encounter an error when running an operation with attributes requiring iDRAC Datacenter license, on a system without this required license.
System.ThermalSettings.MaximumPCIeInletTemperatureLimit (Read or Write)
- Display Name
- Maximum PCIe Inlet Temperature Limit
- Description
- Defines the Maximum PCIe Inlet Temperature Limit.
- Legal Values
- 55 - 0
- 45 - 1
- Default Value
- 0
- Write Privilege
- Configure iDRAC
- License Required
- Datacenter License
- Dependency
- Feature must be supported to set the value.
- Is Platform Dependent
- No
- Notes
- You may encounter an error when running an operation with attributes requiring iDRAC Datacenter license, on a system without this required license.
System.ThermalSettings.MaximumPCIeInletTemperatureLimitSupport (Read Only)
- Display Name
- Maximum PCIe Inlet Temperature Limit Support
- Description
- Defines if the Maximum PCIe Inlet Temperature Limit configuration is supported.
- Legal Values
- Not Supported - 0
- Supported - 1
- Default Value
- 0
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
- Notes
- You may encounter an error when running an operation with attributes requiring iDRAC Datacenter license, on a system without this required license.
System.ThermalSettings.MinimumFanSpeed (Read or Write)
- Display Name
- Minimum Fan Speed
- Description
- Minimum Fan Speed
- Legal Values
- Integer values from 0 to 255.
- Default Value
- 255
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
- Notes
- You may encounter an error when running an operation with attributes requiring iDRAC Datacenter license, on a system without this required license.
System.ThermalSettings.PCIeSlotLFMSupport (Read Only)
- Display Name
- PCIe Slot LFM Support
- Description
- Specifies if the PCIe LFM feature is supported
- Legal Values
- Not Supported - 0
- Supported - 1
- Default Value
- 0
- Write Privilege
- Server Control and Configuration
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
- Notes
- You may encounter an error when running an operation with attributes requiring iDRAC Datacenter license, on a system without this required license.
System.ThermalSettings.SetAirTemperatureRiseLimit (Read or Write)
- Display Name
- Set Air Temperature Rise Limit
- Description
- Defines if the Air Temperature Rise Limit configuration is enabled/disabled.
- Legal Values
- Disabled - 0
- Enabled - 1
- Default Value
- 0
- Write Privilege
- Configure iDRAC
- License Required
- Datacenter License
- Dependency
- Feature must be supported to set the value.
- Is Platform Dependent
- No
- Notes
- You may encounter an error when running an operation with attributes requiring iDRAC Datacenter license, on a system without this required license.
System.ThermalSettings.SetMaximumExhaustTemperatureLimit (Read or Write)
- Display Name
- Set Maximum Exhaust Temperature Limit
- Description
- Defines if the Exhaust Temperature Limit configuration is disabled or enabled.
- Legal Values
- Disabled - 0
- Enabled - 1
- Default Value
- 0
- Write Privilege
- Configure iDRAC
- License Required
- Express License
- Dependency
- Feature must be supported to set the value.
- Is Platform Dependent
- Yes
- Notes
- You may encounter an error when running an operation with attributes requiring iDRAC Datacenter license, on a system without this required license.
System.ThermalSettings.SoundCapState (Read Only)
- Display Name
- SoundCap State
- Description
- Specifies whether the Sound Cap 2.0 max fan speed bound is enabled or disabled
- Legal Values
- Disabled - 0
- Enabled - 1
- Not Applicable - 2
- Default Value
- 2
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
- Notes
- You may encounter an error when running an operation with attributes requiring iDRAC Datacenter license, on a system without this required license.
System.ThermalSettings.SystemCFMSupport (Read Only)
- Display Name
- System CFM Support
- Description
- Specifies if the System CFM is supported
- Legal Values
- Not Supported - 0
- Supported - 1
- Not Licensed - 2
- Default Value
- 0
- Write Privilege
- Server Control and Configuration
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
- Notes
- You may encounter an error when running an operation with attributes requiring iDRAC Datacenter license, on a system without this required license.
System.ThermalSettings.SystemExhaustTemperature (Read Only)
- Display Name
- System Exhaust Temperature
- Description
- Indicates the current system exhaust temperature.
- Legal Values
- Integer values from 0 to 127.
- Default Value
- 0
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
- Notes
- You may encounter an error when running an operation with attributes requiring iDRAC Datacenter license, on a system without this required license.
System.ThermalSettings.SystemInletTemperature (Read Only)
- Display Name
- System Inlet Temperature
- Description
- Indicates the current system inlet (ambient) temperature.
- Legal Values
- Integer values from 0 to 127.
- Default Value
- 0
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
- Notes
- You may encounter an error when running an operation with attributes requiring iDRAC Datacenter license, on a system without this required license.
System.ThermalSettings.SystemInletTemperatureSupportLimitPerConfiguration (Read Only)
- Display Name
- System Inlet Temperature Support Limit Per Configuration
- Description
- Indicates the system inlet temperature limit supported for system configuration.
- Legal Values
- Integer values from 0 to 127.
- Default Value
- 0
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
- Notes
- You may encounter an error when running an operation with attributes requiring iDRAC Datacenter license, on a system without this required license.
System.ThermalSettings.TargetExhaustTemperatureLimit (Read Only)
- Display Name
- Target Exhaust Temperature Limit
- Description
- Indicates the current effective target exhaust temperature limit.
- Legal Values
- Integer values from 0 to 127.
- Default Value
- 0
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
- Notes
- You may encounter an error when running an operation with attributes requiring iDRAC Datacenter license, on a system without this required license.
System.ThermalSettings.ThermalProfile (Read or Write)
- Display Name
- Thermal Profile Optimization
- Description
- Specifies the Thermal Profile
- Legal Values
- Default Thermal Profile Settings - 0
- Maximum Performance - 1
- Minimum Power - 2
- Sound Cap - 3
- Default Value
- 0
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- Yes
- Notes
- You may encounter an error when running an operation with attributes requiring iDRAC Datacenter license, on a system without this required license.
- Restart the system to activate the power and thermal settings.
System.ThermalSettings.ThirdPartyPCIFanResponse (Read or Write)
- Display Name
- Fan Response
- Description
- Third Party PCI fan response
- Legal Values
- Disabled - 0
- Enabled - 1
- Default Value
- None
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
- Notes
- You may encounter an error when running an operation with attributes requiring iDRAC Datacenter license, on a system without this required license.
System.USBFront.Enable (Read or Write)
- Display Name
- Enable
- Description
- Enables or disables the host front USB port. This setting can be overwritten by BIOS Menu setting.
- Legal Values
- Enabled - 2
- Disabled - 1
- Not Applicable - 0
- Default Value
- 0
- Write Privilege
- Server Control and Configuration
- License Required
- Not Applicable
- Dependency
- System.USBFront.Enable can only be set to Enable/Disable if iDRAC.PlatformCapability.FrontPortUSBConfiguration is Enabled. System. USBFront.Enable can only be set to NotApplicable if iDRAC.PlatformCapability.FrontPortUSBConfiguration is Disabled.
- Is Platform Dependent
- No
- Notes
- This setting can be overwritten by BIOS Menu setting.
System.WarrantyInfo.Cost (Read or Write)
- Display Name
- Cost
- Description
- The total cost of the warranty service on a system.
- Legal Values
- String of up to 32 ASCII characters.
- Default Value
- 0
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.WarrantyInfo.Duration (Read or Write)
- Display Name
- Duration
- Description
- The number of days or months that the warranty is to be in force.
- Legal Values
- String of up to 64 ASCII characters.
- Default Value
- 0
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.WarrantyInfo.EndDate (Read or Write)
- Display Name
- End Date
- Description
- The date that extended warranty service ends.
- Legal Values
- String of up to 32 ASCII characters.
- Default Value
- None
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
System.WarrantyInfo.UnitType (Read or Write)
- Display Name
- Unit Type
- Description
- Indicates whether the length of the warranty is measured in days or months.
- Legal Values
- Days - 0
- Months - 1
- Default Value
- 0
- Write Privilege
- Configure iDRAC
- License Required
- Not Applicable
- Dependency
- None
- Is Platform Dependent
- No
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\