Dell EMC PowerFlex Rack Using PowerFlex Manager

Add a network to a service

You can add an available network to a service or choose to define a new network for a configuration that was initially deployed outside of PowerFlex Manager. You cannot remove an added network using PowerFlex Manager.

1. Log in to PowerFlex Manager.
2. On the menu bar, click Services.
3. Select a service for which you want to add a network and in the right pane, click View Details.
4. Under Resource Action, from the Add Resources list, click Add Network.
   The Add Network window is displayed. All used resources and networks are displayed under Resource Name and Networks.
5. Click Add Additional Network to add an additional network:
   1. From the Available Networks list, select the network, and click Add.
      The selected network is displayed under Network Name. You can define a new network by clicking Define a New Network.
   2. Select Port Group from the Select Port Group list.
   3. Click Save.
6. Click Add Additional Static Route to add an additional static route:
   1. Click Add New Static Route.
   2. Select a Source Network.

      The source network must be a PowerFlex data network or a replication network.

   3. Select a Destination Network.

      The destination network must be a PowerFlex data network or a replication network.

   4. Type the IP address for the Gateway.
   5. Click Save.