Dell EMC PowerFlex Rack Using PowerFlex Manager

Resource health status

The following table describes the health states that might appear for a resource.


Icon	Health status	Description
	Healthy	The resource is working as expected.
	Warning	The resource is in a state that requires corrective action, but does not affect the overall system health. For example, the firmware running on the resource is not at the required level or is not compliant. For supported switches, a warning health status might be because the SNMP community string is invalid or not set correctly. If a warning health status displays, PowerFlex Manager is unable to perform health monitoring for the switch. NOTE:If the service has VMware ESXi and is set to maintenance mode, a message displays in the View Details pane.
	Critical	An issue requiring immediate attention exists in one of the following hardware or software components: Battery CPU Fans Power supply Storage devices Licensing For supported switches, a critical health status might indicate that the power supply is not working properly or a CPU has overheated. NOTE:If the service is in a power off state, a message displays in the View Details pane.
	Unknown	The resource status is unknown. For example, for a supported switch, an unknown status might indicate that the switch has been turned off or is still being discovered.
	Pending	The resource status is pending.
	Service Mode	The resource is in Service Mode. NOTE:If the resource fails to exit Service Mode, an informational message displays in the recent activity.