Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Inspiron 14 3000 Series Service Manual - Memory Upgrade

PDF

Removing the memory modules

Remove the battery

  1. Close the display and turn the computer over.
  2. Slide the battery latches to the unlock position. You hear a click sound when the battery is unlocked.
  3. Using your fingertips, lift the battery at an angle and remove the battery off the computer base.
    Image: Removing the battery

    1. battery

    2. latches (2)

    3. computer base

  4. Turn the computer over, open the display, and press the power button for five seconds to ground the system board.

Remove the base cover

  1. Remove the screw that secures the base cover to the computer base.
  2. Slide the base cover to release the tabs on the base cover from the slots on the computer base.
  3. Lift the base cover off the computer base.
    Image: Removing the base cover

    1. screw

    2. base cover

Remove the memory module

  1. Use your fingertips to carefully spread apart the securing-clips on each end of the memory-module slot until the memory module pops up.
  2. Remove the memory module from the memory-module slot.
    Image: Removing the memory module

    1. securing clips (2)

    2. memory-module slot

    3. memory module

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\