PowerProtect Data Manager 19.9 SAP HANA Agent User Guide

Install the SAP HANA agent

Learn how to install the SAP HANA agent on all the Linux database servers that must access the DD system.

1. In the PowerProtect Data Manager UI:
   1. Select Agent Downloads from Dashboard > System Settings.
   2. Select the SAP HANA agent download package, dbappagent199_linux_x86_64.tar.
   3. Download the package to the SAP HANA host on Linux.
2. Uncompress the downloaded tar file by running the following command as the SAP HANA user:

   tar -xvf dbappagent199_linux_x86_64.tar.gz

   NOTE To validate the .rpm files before you install the software, follow the instructions in Knowledgebase article number 546613 at https://www.dell.com/support/kbdoc/en-us/546613.
3. As the root user, run the ppdmHanaInstall.sh script with the --server option to install the SAP HANA agent and register the agent with the PowerProtect Data Manager server:

   ppdmHanaInstall.sh --server=<PowerProtect_Data_Manager_server_IP_address>

   NOTE If you specify a hostname or fully qualified domain name (FQDN) with an underscore (_) for the PowerProtect Data Manager server, then the communication will be done by the system's IP, if provided by the system on registration.
4. If you do not specify the --server option with the PowerProtect Data Manager server IP address on the command line, the script prompts for the IP address of the server:

   Do you wish to register with server? [y/n] y
   Enter PowerProtect Data Manager IP address:

5. To verify the installed version of the SAP HANA agent, run the following command:

   rpm -qa | grep "agent"

   emcdbappagent-19.9.0.0.0-1.x86_64
   powerprotect-agentsvc-19.9.0.0.0-1.x86_64