PowerProtect Data Manager 19.9 File System Agent User Guide

Update the File System agent on Linux in interactive mode

Use this interactive procedure to update the File System agent on supported Linux systems.

1. In the PowerProtect Data Manager UI:
   1. Select Agent Downloads from the System Settings menu.
   2. Select the File System agent download package for Linux, fsagent199_linux_x86_64.tar.gz.
   3. Download the package in the location that you want to install the File System agent.
      NOTE Relocating the installation to another partition or mount point on Linux is not supported.
2. Untar the installer by running tar xvf fsagent199_linux_x86_64.tar.gz.

   Then run the command cd fsagent to change the current working directory to the extracted path.

   NOTE To validate the .rpm files prior to the installation step, follow the instructions in Knowledgebase article number 546613 at https://www.dell.com/support/kbdoc/en-us/546613.
3. Run the install.sh script.
   The following .rpm or .deb files are installed as part of the script:

   • powerprotect-agentsvc.rpm or powerprotect-agentsvc.deb—Installs or updates the agent service component for File System agent.
   • ppdm_bbbwt.rpm or ppdm-bbbwt.deb—Installs the block-based backups driver.
   • ppdm_fsagent.rpm or ppdm-fsagent.deb—Installs the File System agent related files and folders.
4. Type the PowerProtect Data Manager server FQDN or IP address. It is recommended to use the FQDN.
   NOTE If another application agent is already installed on the client and registered to PowerProtect, ensure that you register the agent with the existing PowerProtect Data Manager server FQDN. When you register the agent with a PowerProtect Data Manager server that is different from the currently registered server, no warning message appears, and requests are routed to the newer server instance.
5. To enable the PowerProtect Data Manager communication 7000 TCP port, run the /opt/dpsapps/agentsvc/configfw.sh script as the root user.
   The system responds that the firewall script is running, and is configuring firewall rules.

   NOTE If the firewall rules are not applied, restart the firewall.