Windows 11 IoT Enterprise LTSC 2024 Upgrade Guide

1. How can I know that my device is ready to upgrade?

   You can confirm that your device is prepared for the Windows 11 IoT Enterprise LTSC 2024 upgrade after the Windows11IoTEUpgradeKit.exe package has been successfully installed on the Windows 10 IoT Enterprise LTSC 2021 device.

   When you remotely deploy the upgrade kit using Wyse Management Suite (WMS), you can check the upgrade readiness of the devices by checking the following:

• Check the Job Status in WMS—After deploying the Windows11IoTEUpgradeKit.exe package remotely using WMS, the status for devices where the deployment was successful is indicated as Success:1 in the Jobs section of WMS. This confirms that the kit has been installed on the device.
• Verify the Serial Number in WMS Portal Administration—Upon the successful deployment of the Windows11IoTEUpgradeKit.exe, devices become capable of supporting the Windows 11 IoT Enterprise LTSC 2024 upgrade, and their Serial Numbers are then displayed in the WMS Portal Administration — Your Subscription.

Follow these steps to view the Serial Numbers of the upgrade-supported devices:

1. Log in to the WMS as an administrator.
2. Go to Portal Administration > Account > Subscription. The Portal Administration — Your Subscription page is displayed.
3. Go to License Usage > Windows 11 IoT Enterprise LTSC 2024 License usage and click View/Upload License Keys.

The Windows 11 IoT Enterprise LTSC 2024 License usage page is displayed. The Serial Numbers is displayed in the first column of the table.