Latitude 7455 Owner's Manual

PDF

Installing the battery cable

CAUTION:The information in this installation section is intended for authorized service technicians only.

Prerequisites

If you are replacing a component, remove the existing component before performing the installation procedure.

About this task

The following images indicate the location of the battery cable and provide a visual representation of the installation procedure.

Figure 1. Installing the battery cable
Image: Installing the battery cable

Steps

  1. Route the battery cable through the routing guides at the back of the battery.
  2. Connect the battery cable to the connector on the battery.
  3. Adhere the Mylar to secure the battery cable to the battery.
  4. Turn the battery over and adhere the Mylar to secure the connector to the battery.

Next steps

  1. Install the battery.
  2. Install the base cover.
  3. Install the SIM card, if applicable.
  4. Follow the procedure in After working inside your computer.
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\