OptiPlex 7080 Tower Setup and specifications guide

PDF

Ports and connectors

Table 1. Ports and connectors
The following table lists ports and connectors available on OptiPlex 7080 Tower.
Description	Values
External:
Network	One RJ-45 port 10/100/1000 Mbps (rear)
USB	One USB 2.0 port with PowerShare (front) One USB 3.2 Gen 2 Type-A port (front) One USB 3.2 Gen 2 Type-C port (front) One USB 2.0 port (front) Three USB 3.2 Gen 1 Type-A ports (rear) One USB 3.2 Gen 2 Type-A port (rear) Two USB 2.0 ports with Smart Power On (rear) One USB 3.2 Gen 2 Type-C Alt-Mode (rear) (optional)
Audio	One Universal Audio Jack (front) One Line-out audio port with re-tasking to Line-in(rear)
Video	Two DisplayPort 1.4 ports (rear) One VGA Port/DisplayPort 1.4 Port/HDMI 2.0b Port/ USB 3.2 Gen2 Type-C Port with Alt-mode (optional)
Memory card reader	One SD 4.0 (optional)
Power port	4.50 mm x 2.90 mm DC-in
Parallel/Serial port	One Serial port
PS/2 port	Two
Security	One Kensington security-cable slot
Antenna	Two SMA connectors (optional)
Internal:
Expansion	One full-height PCIe x1 slot One full-height PCIe x16 slot One full-height PCI slot One full-height PCIe x 4 slot
SATA	Four SATA slots for 3.5-inch Hard-disk drive, 2.5-inch Hard-disk drive, 1 SATA slot for slim Optical Disk Drive
M.2	One M.2 2230 slot for WiFi and Bluetooth card One M.2 2230 slot for solid-state drive One M.2 2230/2280 slot for SSD/Intel Optane NOTE: To learn more about the features of different types of M.2 cards, see the knowledge base article SLN301626.