OptiPlex 7400 All-in-One Setup and Specifications

PDF

Display

The following table lists the display specifications of your OptiPlex 7400 All-in-One.

Table 1. Display specifications
The following table provides the detailed display specifications of OptiPlex 7400 All-in-One.
Description		Option one (non-touch display)	Option two (touch-display)
Display type		Full High Definition (FHD), Low Blue Light	Full High Definition (FHD)
Display-panel technology		Wide Viewing Angle (WVA)	Wide Viewing Angle (WVA)
Display-panel dimensions (active area):
	Height	296.46 mm (11.67 in.)	296.46 mm (11.67 in.)
	Width	527.04 mm (20.75 in.)	527.04 mm (20.75 in.)
	Diagonal	604.70 mm (23.81 in.)	604.70 mm (23.81 in.)
Display-panel native resolution		1920 x 1080	1920 x 1080
Luminance		250 Nits (typical) 200 Nits (minimum)	250 Nits (typical) 200 Nits (minimum)
Megapixels		2.07	2.07
Color gamut		99% sRGB (typical)	72% NTSC typical
Pixels Per Inch (PPI)		92	92
Contrast ratio		700:1 (minimum) 1000:1 (typical)	700:1 (minimum) 1000:1 (typical)
Response time		25 ms (maximum) 14 ms (typical)	25 ms (maximum) 14 ms (typical)
Refresh rate		60 Hz	60 Hz
Horizontal view angle		170 degrees (minimum) 178 degrees (typical)	170 degrees (minimum) 178 degrees (typical)
Vertical view angle		170 degrees (minimum) 178 degrees (typical)	170 degrees (minimum) 178 degrees (typical)
Pixel pitch		0.2745 x 0.2745 mm	0.2745 x 0.2745 mm
Power consumption (maximum)		12.70 W	13.48 W
Anti-glare vs glossy finish		Anti-glare	Anti-glare
Adaptive sync		Not applicable	Not applicable
Stylus support		Not applicable	Capacitive touch
Multi-touch feature supported		Not applicable	10-points multi-touch
Display surface		Anti-glare treatment of the front polarizer (Haze 25%, 3H)	Anti-glare treatment of the front polarizer (Haze 25%, 3H)