Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell PowerEdge T320 Systems Owner's Manual

PDF

Expansion Card Installation Guidelines

Table 1. Supported PCI Express Expansion Cards
Expansion Card Slot Processor Connection Height Length Link Width Slot Width
1 Platform Controller Hub Full Height Half Length x4 x8
2 Platform Controller Hub Full Height Full Length x1 x8
3 Processor 1 Full Height Full Length x16 x16
4 Processor 1 Full Height Full Length x4 x8
6 Processor 1 Full Height Half Length x4 x8
  • NOTE: Slot 5 is not applicable.
  • NOTE: Only slot 3, 4, and 6 support Generation 3 PCIe expansion cards.
  • NOTE: The expansion cards are not hot-swappable.

The following table provides a guide for installing expansion cards to ensure proper cooling and mechanical fit. The expansion cards with the highest priority must be installed first using the slot priority indicated. All other expansion cards must be installed in card priority and slot priority order.

Table 2. Expansion Card Installation Order
Card Priority Card Type Slot Priority Maximum Allowed
1 GPU 3 1
2 External RAID 1, 4, 3, 6 1
3 Internal RAID 6, 4, 3, 1 1
4 10 Gb NICs 4, 3, 6 3
5 FC8 HBA 4, 3, 1, 6 4
6 CNAs 4, 3, 1, 6 4
7 1 Gb NICs 2, 4, 3, 1, 6 5
8 Non-RAID 4, 3, 1, 6 1
9 Internal tape adapter 2, 4, 3, 1, 6 1
  • NOTE: If you are installing a double-width GPU card in slot 3, you cannot install an expansion card in slot 2.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\