Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell Latitude 7390 Owner's Manual

Installing heat sink assembly

Heat sink assembly comprises of heat sink and the system fan.
  1. Align the heat sink assembly with screw holders on the system board and connect the fan cable to the connector on the system board..
    • NOTE: Ensure to first connect the fan cable to the system board before securing the heat-sink assembly onto the system board.
  2. Tighten the M2 x 5 screws to secure the fan to the system board
    • NOTE: Ensure to connect fan cable before installing heatsink.
  3. Install the :
    1. battery

    2. base cover

  4. Follow the procedure in After working inside your computer .

Rate this content

Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\