Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell Latitude 7390 Owner's Manual

Removing keyboard assembly

  • NOTE: The keyboard and the keyboard tray together are called the keyboard assembly.
  1. Follow the procedure in Before working inside your computer .
  2. Remove:
    1. base cover

    2. battery

    3. memory module

    4. PCIe SSD

    5. SATA SSD

    6. WLAN card

    7. WWAN card

    8. heatsink assembly

    9. system board

  3. Disconnect the cables from the palmrest end:
    1. touchpad and USH board cables [1]
    2. keyboard backlight cable [2]
    3. keyboard cable [3]
    The image displays disconeecting palmrest cables
  4. To remove the keyboard assembly:
    1. Remove the M2 x 2.5 screws (19) that secure the keyboard [1].
    2. Lift the keyboard assembly from the chassis [2].
    The image displays removing the 19 screws from keyboard chassis
  5. Remove the screws (5) that secures the keypad to the keyboard chassis and lift the keyboard [1,2].The image displays that secures the keypad to the keyboard chassis

Rate this content

Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\