Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell Latitude 7390 Owner's Manual

Removing touchpad buttons board

  1. Follow the procedure in Before working inside your computer .
  2. Remove the:
    1. base cover

    2. battery

  3. To disconnect the smart card cable:
    1. Disconnect the smart card cable [1].
    2. Lift the smart card cable that is affixed to the computer [2] to reveal the touchpad buttons board cable.
    3. Remove the adhesive tape that secures the speaker cable to the touchpad panel [3].
      • NOTE: Un-route the speaker cable from the routing clips from the touchpad buttons.
    The image displays removing the Touchpad panel
  4. To remove the touchpad buttons board:
    1. Disconnect the touchpad buttons board cable from the touchpad board [1].
      • NOTE: The touchpad buttons board cable is below the smart card cable. Ensure to lift the latch, to release the touchpad button board cable.
    2. Remove M2.0 x 2.5 screws (2) that secure the touchpad buttons board [2].
    3. Lift the touchpad buttons board from the computer [3].
    The image displays removing the Touch button board

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\