Dell ThinOS 10.x 2502, 2505, 2508, and 2511 Release Notes

PDF

Known and fixed issues

The following table displays the known and fixed issues:

Table 1. Fixed issues Fixed issues
Issue ID	Description
DTOS10-10848	VDI Authentication prompts even after successful login to the Azure.
DTOS10-11166	USB redirection through AVD failed when VMware client SDK is not installed.
DTOS10-11587	Time Zone does not sync after migrating it from ThinOS 9 to ThinOS 10.
DTOS10-11592	ThinOS 10 taskbar overlaps applications.
DTOS10-12357	Customers need to be able to use a proxy exclusion list for ThinOS 10.
DTOS10-12622	AWS Broker agent sign-in is unavailable after the session is disconnected.
DTOS10-12424	SMB printer configuration with password containing ! and @ symbols are not working.
DTOS10-10599	Upgrade from ThinOS 9.2408 to 10.2502 through a USB is unsuccessful due to TPM HMAC authorization failure.

Table 2. Known issues Known issues
Issue ID	Description
DTOS10-12555	The spin icon is not displayed on low-resolution monitors during boot with dual DisplayPort connections.
DTOS10-12356	Custom info intermittently disappears after changing the time zone or date/time settings, or when the device is left idle. (Reproducibility: 6/10)
DTOS10-12187	Audio is muted by default on the Dell Pro 16 Plus PB16250.
DTOS10-11835	The device becomes unresponsive when a VMware session is disconnected while using a four 4K monitor setup on the Amulet (DX1500 series) with 8 GB RAM.
DTOS10-11504	The switch pointer key functionality does not work from a numeric keypad.
DTOS10-11480	The device experiences a delay when connecting to the 5G dongle network.
DTOS10-11471	On the Amulet (DX1500 series) platform, only two HDMI/DisplayPort audio output devices are listed in a four-monitor audio setup.
DTOS10-12374	Connect USB device redirection does not work properly in VMware session.
DTOS10-12362	Imaging fails when Secure Boot is enabled in Latitude 5550 with Intel Core Ultra 5 processor.
DTOS10-12287	Boot failure observed in Latitude 5440 when connected to a dock with three 4K monitors.
DTOS10-12108	Dell Pro Rugged 13 RA13250 and Dell Pro Rugged 14 RB14250 do not support a three 4K monitor configuration when connected using WD19S docking station.
DTOS10-12103	The brightness adjustment of the integrated display for Dell Pro 16 Plus PB16250 is not supported using the keypad.
DTOS10-11796	Forgot password does not work in Imprivata (2505_10.0067).
DTOS10-11501	UI screen glitches were noticed during the AWS session in Latitude 5450.
DTOS10-11482	Unable to mirror when connected through a Dock in Latitude 5440 with an Intel Core 5 processor.
DTOS10-11460	Monitor Ethernet does not work after a client restart in Latitude 5440 with Intel Core 3 processor.
DTOS10-12097	Display output fails after reboot when the secondary monitor is disabled on Dell Pro 16 Plus PB16250.
DTOS10-11193	On the Latitude 5440 with Intel Core 5 processor, the display resolution settings change cannot be applied when the system is connected to a docking station.
DTOS10-11137	The device flickers when three 4K monitors are connected using WD19S dock station in a Dell Pro 14 PC14250.
DTOS10-7152	After selecting Force Core Dump, glitches can appear on the screen before the system restarts.
DTOS10-12352	Imprivata PIW mode does not support unlocking sessions using fingerprint or proximity card authentication.
DTOS10-11503	APT window opens on a secondary monitor in four-display configurations, rather than the primary screen.
DTOS10-11200	In the Lakeside interface, the OS type is incorrectly displayed as Linux instead of Dell ThinOS 10.