Dell ThinOS 10.x 2502, 2505, 2508, and 2511 Release Notes

Dell docking station WD19/WD22

After installation, a notification appears prompting the user to unplug and replug the docking station.

The docking station is temporarily non-functional during the update (~1 minute).

The thin client automatically reboots after the update is applied.

Dell monitor U2724DE

The monitor firmware update is displayed on-screen during installation.

The monitor disconnects and reconnects after the update.

The thin client automatically reboots after the installation is complete.

Important notes

• Peripheral must remain connected throughout the update process.
• Firmware package download is blocked if the peripheral is not connected.
• If the download is deferred to the next reboot and the peripheral is disconnected, the update fails.
• Only one firmware package should be published at a time. Multiple peripheral firmware updates are not supported.
• Do not publish peripheral firmware alongside OS, application, or BIOS packages.
• Firmware packages are single-use; another peripheral cannot be updated using the same package.
• For monitor firmware updates, ensure that the uplink cable is connected.
• Do not connect Dell Monitor U2724DE to Latitude 5450 using Thunderbolt cable, as it may cause system failure.