Dell 14 Plus 2-in-1 DB04255 Owner's Manual

PDF

Installing the USB Type-C bracket

CAUTION:The information in this section is intended for authorized service technicians only.

About this task

The following image indicates the location of the USB Type-C bracket and provides a visual representation of the installation procedure.
Figure 1. Installing the USB Type-C bracket
Installing the USB Type-C bracket

Steps

  1. Place and align the screw holes on the USB Type-C bracket with the screw holes on the palm-rest and keyboard assembly.
  2. Replace the two screws (M2x4) that secure the USB Type-C bracket to the palm-rest and keyboard assembly.
  3. Close the left display hinge and align the screw holes on the left display hinge with the screw holes on the palm-rest and keyboard assembly.
  4. Replace the three screws (M2.5x4) that secure the left display hinge to the palm-rest and keyboard assembly.

Next steps

  1. Install the base cover.
  2. Follow the procedure in After working inside your computer.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\