Dell EMC SmartFabric OS10 User Guide Release 10.5.0

You can troubleshoot OSPFv3 operations and check questions for typical issues that interrupt a process.

• Is OSPFv3 enabled globally?
• Is OSPFv3 enabled on the interface?
• Are adjacencies established correctly?
• Are the interfaces configured for L3 correctly?
• Is the router in the correct area type?
• Are the OSPF routes included in the OSPF database?
• Are the OSPF routes included in the routing table in addition to the OSPF database?
• Are you able to ping the link-local IPv6 address of adjacent router interface?

Troubleshooting OSPFv3 with show Commands

• View a summary of all OSPF process IDs enabled in EXEC mode.

  show running-configuration ospfv3

• View summary information of IP routes in EXEC mode.

  show ipv6 route summary

• View summary information for the OSPF database in EXEC mode.

  show ipv6 ospf database

• View the configuration of OSPF neighbors connected to the local router in EXEC mode.

  show ipv6 ospf neighbor

View OSPF Configuration

OS10# show running-configuration ospfv3
!
interface ethernet1/1/1
ip ospf 100 area 0.0.0.0
!
router ospf 100
log-adjacency-changes