
VXLAN and BGP EVPN Configuration Guide for Dell EMC SmartFabric OS10 Release 10.5.2
clear mac address-table dynamic virtual-network
Clears MAC addresses learned on all or a specified VXLAN virtual network.
- Syntax
- clear mac address-table dynamic virtual-network [interface {ethernet node/slot/port:subport | port-channel number} | local | vn-id [address mac-address | local]]
- Parameters
- interface ethernet node/slot/port[:subport]
- Clear all MAC addresses learned on the specified interface.
- interface port-channel number
- Clear all MAC addresses learned on the specified port channel.
- virtual-network vn-id
- Clear all MAC addresses learned on the specified virtual network, from 1 to 65535.
- local
- Clear only locally-learned MAC addresses.
- vn-id
- Clear learned MAC addresses on the specified virtual network, from 1 to 65535.
- vn-id local
- Clear locally learned MAC addresses on the specified virtual network, from 1 to 65535.
- vn-id address mac-address
- Clear only the MAC address entry learned in the specified virtual network. Enter the MAC address in EEEE.EEEE.EEEE format.
- Default
- Not configured
- Command mode
- EXEC
- Usage information
- Use this command with no optional parameters to delete all dynamic MAC address entries that are learned only on virtual-network bridges from the MAC address table. This command does not delete MAC address entries learned on simple VLAN bridges. Use the show mac address-table virtual-network command to display the MAC addresses learned on a virtual network.
- Example
OS10# clear mac address-table dynamic virtual-network
- Supported releases
- 10.4.2.0 or later
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\