
VXLAN and BGP EVPN Configuration Guide for Dell EMC SmartFabric OS10 Release 10.5.2
show mac address-table count virtual-network
Displays the number of MAC addresses learned on virtual networks.
- Syntax
- show mac address-table count virtual-network [dynamic | local | remote | static | interface {ethernet node/slot/port:subport | port-channel number} | vn-id]
- Parameters
- dynamic
- Display the number of local dynamically-learned MAC addresses.
- local
- Display the number of local MAC addresses.
- remote
- Display the number of MAC addresses learned from remote VTEPs.
- static
- Display the number of local statically-configured MAC addresses.
- interface ethernet node/slot/port[:subport]
- Display the number of MAC addresses learned on the specified interface.
- interface port-channel number
- Display the number of MAC addresses learned on the specified port channel.
- vn-id
- Display the number of MAC addresses learned on the specified virtual network, from 1 to 65535.
- Default
- Not configured
- Command mode
- EXEC
- Usage information
- Use this command to display the number of MAC address entries learned on virtual networks in the MAC address table.
- Example
OS10# show mac address-table count virtual-network MAC Entries for all vlans : Dynamic Address Count : 8 Static Address (User-defined) Count : 0 Total MAC Addresses in Use: 8
- Supported releases
- 10.4.2.0 or later
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\