
VXLAN and BGP EVPN Configuration Guide for Dell EMC SmartFabric OS10 Release 10.5.2
show virtual-network interface counters
Displays packet statistics for a member port, port channel, or VLAN in VXLAN virtual networks.
- Syntax
- show virtual-network interface {ethernet node/slot/port:subport | port-channel number} [vlan vlan-id] counters
- Parameters
- interface ethernet node/slot/port[:subport]
- Enter the port information for an Ethernet interface.
- interface port-channel number
- Enter a port-channel number, from 1 to 128.
- vlan vlan-id
- (Optional) Enter a VLAN ID, from 1 to 4093.
- Default
- Not configured
- Command mode
- EXEC
- Usage information
Use this command to monitor the packet throughput on a port interface that is a member of a VXLAN virtual network. Assign a VLAN member interface to only one virtual network. To clear VXLAN packet counters on a member port or VLAN members of a virtual network, use the clear virtual-network interface {ethernet node/slot/port:subport | port-channel number} [vlan vlan-id] counters command.
- Example
OS10# show virtual-network interface 1/1/3 vlan 100 counters Virtual-Network Input (Packets/Bytes) Output (Packets/Bytes) 2000 457/3570 277/13709
- Supported releases
- 10.4.2.0 or later
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\