Dell EMC XC Core XC450 Installation and Service Manual

PDF

Front view of the system

This image shows the front view of 4 x 3.5-inch system. — Figure 1. Front view of 4 x 3.5-inch drive system

Table 1. Features available on the front of the systemItem 1 is the left control panel, contains system health and system ID, status LED, and optional iDRAC Quick Sync 2 (wireless) indicators. The status LED enables you to identify any failed hardware components. The Quick Sync 2 enables management of the system by using mobile devices. Item 2 is hard drive slots, enables you to install hard drives that are supported on your system. Item 3 is the video connector, enables you to connect a display device to the system. Item 4 is right control panel, contains the power button and USB port, iDRAC Direct micro port, and the iDRAC Direct status LED. Item 5 is the information tag. Item 6 is the drive blank.
Item	Ports, panels, and slots	Icon	Description
1	Left control panel	N/A	Contains the system health, system ID, status LED, and the iDRAC Quick Sync 2 (wireless) indicator. NOTE:The iDRAC Quick Sync 2 indicator is available only on certain configurations. Status LED: Enables you to identify any failed hardware components. There are up to five status LEDs and an overall system health LED (Chassis health and system ID) bar. For more information, see the Status LED indicators section. Quick Sync 2 (wireless): Indicates a Quick Sync enabled system. The Quick Sync feature is optional. This feature allows management of the system by using mobile devices called as OpenManage Mobile (OMM) feature. Using iDRAC Quick Sync 2 with OpenManage Mobile (OMM) aggregates hardware or firmware inventory and various system level diagnostic and error information that can be used in troubleshooting the system. For more information, see the Integrated Dell Remote Access Controller User's Guide available at https://www.dell.com/idracmanuals.
2	Drive	N/A	Enables you to install drives that are supported on your system.
3	Right control panel	N/A	Contains the power button, USB port, iDRAC Direct micro port, and the iDRAC Direct status LED.
4	Information tag	N/A	The Information tag is a slide-out label panel that contains system information such as Service Tag, NIC, MAC address, and so on. If you have opted for the secure default access to iDRAC, the Information tag also contains the iDRAC secure default password.
5	Drive blank	N/A	Enables you to install drives that are supported on your system.

This image shows the front view of 8 x 2.5-inch drive system — Figure 2. Front view of 8 x 2.5-inch drive system