Dell PowerEdge R7525 Installation and Service Manual

PDF

Front view of the system

Figure 1. Front view of the 24 x 2.5-inch drive system
This image shows front view of the 24 x 2.5-inch drive system.
Figure 2. Front view of the 16 x 2.5-inch drive system
This image shows front view of the 16 x 2.5-inch drive system.
Figure 3. Front view of the 8 x 2.5-inch drive system
This image shows front view of the 8 x 2.5-inch drive system.
Figure 4. Front view of the 12 x 3.5-inch drive system
This image shows front view of the 12 x 3.5-inch drive system.
Table 1. Features available on the front of the systemItem 1 is the left control panel, contains system health and system ID, status LED, and optional iDRAC Quick Sync 2 (wireless) indicators. The status LED enables you to identify any failed hardware components. The Quick Sync 2 enables management of the system by using mobile devices. Item 2 is the hard drive slots, enables you to install hard drives that are supported on your system . Item 3 is the right control panel, contains the power button and USB port, iDRAC Direct micro port, and the iDRAC Direct status LED. Item 4 is an information tag that shows system information.
Item Ports, panels, and slots Icon Description
1 Left control panel N/A Contains the system health, system ID, status LED, and the iDRAC Quick Sync 2 (wireless) indicator.
NOTE:The iDRAC Quick Sync 2 indicator is available only on certain configurations.
  • Status LED: Enables you to identify any failed hardware components. There are up to five status LEDs and an overall system health LED (Chassis health and system ID) bar. For more information, see the Status LED indicators section.
  • Quick Sync 2 (wireless): Indicates that a Quick Sync enabled system. The Quick Sync feature is optional. This feature allows management of the system by using mobile devices called as OpenManage Mobile (OMM) feature. Using iDRAC Quick Sync 2 with OpenManage Mobile (OMM) aggregates hardware or firmware inventory and various system level diagnostic and error information that can be used in troubleshooting the system. For more information, see the Integrated Dell Remote Access Controller User's Guide
2 Drive N/A Enables you to install drives that are supported on your system.
NOTE:For drive slot numbers, see the System information labels section.
3 Right control panel N/A Contains the power button, USB port, iDRAC Direct micro port, and the iDRAC Direct status LED.
4 Information tag N/A The Information tag is a slide-out label panel that contains system information such as Service Tag, NIC, MAC address, and so on. If you have opted for the secure default access to iDRAC, the Information tag also contains the iDRAC secure default password.
Figure 5. Front view of the 8 x 3.5-inch drive system
This image shows front view of the 8 x 3.5-inch drive system.
Table 2. Features available on the front of the systemItem 1 is the left control panel, contains system health and system ID, status LED, and optional iDRAC Quick Sync 2 (wireless) indicators. The status LED enables you to identify any failed hardware components. The Quick Sync 2 enables management of the system by using mobile devices. Item 2 is the optical drive bay blank, enables you to install optical drives that are supported on your system. Item 3 is the hard drive slots, enables you to install hard drives that are supported on your system . Item 4 is the right control panel, contains the power button and USB port, iDRAC Direct micro port, and the iDRAC Direct status LED. Item 5 is an information tag that shows system information.
Item Ports, panels, and slots Icon Description
1 Left control panel N/A Contains the system health, system ID, status LED, and the iDRAC Quick Sync 2 (wireless) indicator.
NOTE:The iDRAC Quick Sync 2 indicator is available only on certain configurations.
  • Status LED: Enables you to identify any failed hardware components. There are up to five status LEDs and an overall system health LED (Chassis health and system ID) bar. For more information, see the Status LED indicators section.
  • Quick Sync 2 (wireless): Indicates that a Quick Sync enabled system. The Quick Sync feature is optional. This feature allows management of the system by using mobile devices called as OpenManage Mobile (OMM) feature. Using iDRAC Quick Sync 2 with OpenManage Mobile (OMM) aggregates hardware or firmware inventory and various system level diagnostic and error information that can be used in troubleshooting the system. For more information, see the Integrated Dell Remote Access Controller User's Guide
2 Optical drive blank N/A For the 8 x 3.5-inch drive system, an optical drive bay blank is installed.
3 Drive N/A Enables you to install drives that are supported on your system.
NOTE:For drive slot numbers, see the System information labels section.
4 Right control panel N/A Contains the power button, USB port, iDRAC Direct micro port, and the iDRAC Direct status LED.
5 Information tag N/A The Information tag is a slide-out label panel that contains system information such as Service Tag, NIC, MAC address, and so on. If you have opted for the secure default access to iDRAC, the Information tag also contains the iDRAC secure default password.

For more information about the ports, see the PowerEdge Manuals section.

For more information, see the Dell TechnologiesPowerEdgeR7525 Technical Specifications on the product documentation page.


Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\