Dell PowerEdge R7525 Installation and Service Manual

Right control panel view

Table 1. Right control panelItem 1 is the power button, which indicates if the system is turned on or off. Item 2 is the USB port, which enables you to connect USB devices to the system. Item 3 is the iDRAC Direct LED, indicates that the iDRAC Direct port is connected. Item 4 is the iDRAC Direct port, which enables you to access the iDRAC direct features.
Item	Indicator or button	Description
1	VGA port	Enables you to connect a display device to the system. For more information, see the PowerEdge Manuals section.
2	iDRAC Direct port (Micro-AB USB)	The iDRAC Direct port (Micro-AB USB) enables you to access the iDRAC Direct Micro-AB features. For more information, see the Integrated Dell Remote Access Controller User's Guide. NOTE:You can configure iDRAC Direct by using a USB to micro USB (type AB) cable, which you can connect to your laptop or tablet. Cable length should not exceed three feet (0.91 meters). Performance could be affected by cable quality.
3	USB 2.0-compliant port	The USB port is a 4-pin connector and 2.0-compliant. This port enables you to connect USB devices to the system.
4	Power button	Indicates if the system is powered on or off. Press the power button to manually power on or off the system. NOTE:Press the power button to gracefully shut down the ACPI-compliant operating system.

NOTE:For more information about the ports, see the PowerEdge Manuals section.