Dell PowerEdge T550 Installation and Service Manual

PDF

Installing the fan board tray

Prerequisites

  1. Follow the safety guidelines listed in Safety instructions.
  2. Follow the procedure that is listed in Before working inside your system.
  3. Remove the air shroud.
  4. Remove the cooling fan cage.
  5. Disconnect the cables that are connected to the fan board.

Steps

  1. Align the fan board tray to the guide pins on the system, slide the tray to the left of the system to lock it in place.
  2. Tighten the captive screw to secure the fan board tray to the system.
    Figure 1. Installing the fan board tray

    This image shows installing the fan board tray.

Next steps

  1. Connect the cables to the fan board.
  2. Install the cooling fan cage.
  3. Install the air shroud.
  4. Follow the procedure listed in After working inside your system.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\