Dell PowerEdge XR8720t Installation and Service Manual

System configurations - inside view for PowerEdgeXR8720tsystem

Table 1. Features are available inside the system - Network ConfigurationThis table describes the features inside the system
Item	Component	Description
1	Sled handle	Enables you to remove the sled from the enclosure
2	Dual M.2 SSD riser	Enables to connect two M.2 SSDs for storage
3	Air shroud	Air shroud controls the flow of air
4	Heat sink and heater module	Helps to dissipate the heat generated and heater module generates heat in cold environment
5	Cooling fan assembly	Cooling fans provide cooling for the system components
6	PDB connector	Connects to the PIB on the chassis
7	PDB	Power distribution board
8	OCP riser	Enables the connection of OCP cards to the system
9	ePPS SMA module	This is a coaxial connector used for high-frequency signals and timing inputs/outputs

Table 2. Features are available inside the system - Flexible ConfigurationThis table describes the features inside the system
Item	Component	Description
1	Sled handle	Enables you to remove the sled from the enclosure
2	Dual M.2 SSD riser	Enables to connect two M.2 SSDs for storage
3	Air shroud	Air shroud controls the flow of air
4	Heat sink and heater module	Helps to dissipate the heat generated and heater module generates heat in cold environment
5	Cooling fan assembly	Cooling fans provide cooling for the system components
6	PDB connector	Connects to the PIB on the chassis
7	PDB	Power distribution board
8	Riser 1	Enables the connection of PCIe cards to the system
9	ePPS SMA module	This is a coaxial connector used for high-frequency signals and timing inputs/outputs