Skip to main content

XPS 16 9640 Owner's Manual

Screw list

NOTE:When removing screws from a component, it is recommended to note the screw type and the quantity of screws, and then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is restored when the component is replaced.
NOTE:Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surfaces when replacing a component.
NOTE:Screw color may vary depending on the configuration ordered.
Table 1. Screw listThe following table provides the different screws that are used in your XPS 16 9640.
Component Screw type Quantity Screw image
Base cover M2x4, T5 8 Image: M2x4, T5
Battery M2x4.5 6 Image: M2x4
Solid-state drive thermal shield (Solid-state drive thermal bracket)M2x3 2 Image: M2x3
CPU fan M2x4.5 3 Image: M2x4
GPU fan M2x4.5 3 Image: M2x4
Right hinge M2.5x6 2 Image: M2.5x6
Left hinge M2.5x6 2 Image: M2.5x6
Power button with fingerprint reader M1.4x1.5 4 Inage: M1.4x1.5
Right Type-C bracket M2x4.5 2 Image: M2x4
Left Type C bracket M2x4.5 3 Image: M2x4
WLAN bracket M2x3 1 Image: M2x3
System board M2x4.5 4 Image: M2x4
Display-assembly cable bracket holder M1.4x1.3 2 Image: M1.4x1.3
Display-assembly cable bracket M2x3 2 Image: M2x3

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\