Dell EMC SmartFabric OS10 User Guide Release 10.5.1

This example shows how to install a trusted X.509v3 CA and a host certificate-key pair that supports RADIUS over TLS authentication.

1. Install a trusted CA certificate.

OS10# copy tftp://CAadmin:secret@172.11.222.1/GeoTrust_Universal_CA.crt home://GeoTrust_Universal_CA.crt 
OS10# crypto ca-cert install home://GeoTrust_Universal_CA.crt
Processing certificate ...
Installed Root CA certificate
CommonName = GeoTrust Universal CA
IssuerName = GeoTrust Universal CA

2. Generate a CSR, copy the CSR to a CA server, download the signed certificate, and install the host certificate.

OS10# crypto cert generate request cert-file home://s4048-001-csr.pem
key-file home://tsr6-key.pem cname "Top of Rack 6" altname "IP:10.0.0.6 DNS:tor6.dell.com" 
email admin@dell.com organization "Dell EMC" orgunit Networking locality "santa Clara" 
state California country US length 1024
Processing certificate ...
Successfully created CSR file /home/admin/tor6-csr.pem and key

OS10# copy home://tor6-csr.pem scp://CAadmin:secret@172.11.222.1/s4048-001-csr.pem 

OS10# copy scp://CAadmin:secret@172.11.222.1/s4048-001.crt usb://s4048-001-crt.pem 

OS10# crypto cert install crt-file usb://s4048-001-crt.pem key-file usb://s4048-001-crt.key
This will replace the already installed host certificate.
Do you want to proceed ? [yes/no(default)]:yes
Processing certificate ...
Host certificate installed successfully.

3. Configure an X.509v3 security profile.

OS10# show crypto cert
--------------------------------------
|    Installed non-FIPS certificates    |
--------------------------------------
s4048-001-csr.pem
--------------------------------------
|    Installed FIPS certificates    |
--------------------------------------

OS10# config terminal
OS10(config)# crypto security-profile radius-admin
OS10(config-sec-profile)# certificate s4048-001-csr
OS10(config-sec-profile)# exit

4. Configure the RADIUS over TLS server.

OS10# radius-server host 10.0.0.1 tls security-profile radius-admin key radsec

5. Configure RADIUS-based user authentication.

OS10# aaa authentication login default group radius local