Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell EMC SmartFabric OS10 User Guide Release 10.5.1

PDF

show ip pim interface

Displays information about IP PIM-enabled interfaces.

Syntax
show ip pim [vrf vrf-name] interface
Parameters
vrf vrf-name—Enter the keyword vrf, then the name of the VRF.
Default
None
Command Mode
EXEC
Usage Information
The show ip pim interface command displays the following:
  • Address—IP addresses of the IP PIM-enabled interfaces
  • Interface—Interface type with slot/port information or VLAN/Port Channel ID
  • Version/Mode—PIM version number and mode; v2 for PIM version 2 and S for PIM sparse mode
  • Nbr Count—Active neighbor count on the PIM-enabled interface
  • Query interval—Query interval for router query messages on that interface
  • DR priority—Designated router priority value configured on that interface
  • DR—IP address of the DR for that interface
Example
OS10# show ip pim interface
Address   Interface Ver/Mode Nbr Count Query Intvl DR Prio  DR
----------------------------------------------------------------------
2.2.2.2   vlan103   v2/S      1         30          1       2.2.2.2
3.3.3.2   vlan105   v2/S      1         30          1       3.3.3.2
122.1.1.2 vlan121   v2/S      0         30          1       122.1.1.2
Supported Releases
10.4.3.0 or later

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\