Dell EMC OpenManage Enterprise Version 3.5 User's Guide

Viewing and configuring devices

By clicking OpenManage Enterprise > Devices > selecting a device in the device list > View Details, you can:

• View information about the health and power status, device IP, and Service Tag.
• View general information about the device and perform device control and troubleshooting tasks.
• View device information such as RAID, PSU, OS, NIC, memory, processor, and storage enclosure. OpenManage Enterprise provides a built-in report to get an overview about the NIC, BIOS, Physical Disk and Virtual Disk used on the devices monitored by OpenManage Enterprise. Click OpenManage Enterprise > Monitor > Reports.
• Update or roll back firmware versions of components in a device that are associated with a firmware baseline. See Manage the device firmware and drivers.
  NOTE Updating a device using the Individual Package workflow only supports executable (EXE) based Dell Update Packages. When updating an FX2 CMC, the executable DUP must be installed via one of the sleds in the chassis.
• Acknowledge, export, delete, or ignore the alerts pertaining to a device. See Managing device alerts.
• View and export hardware log data of a device. See Managing individual device hardware logs.
• View and manage the configuration inventory of the device for the purposes of configuration compliance. A compliance comparison is initiated when the configuration inventory is run against the devices.
• View the compliance level of a device against the configuration compliance baseline it is associated with. See Managing the device configuration compliance.