Inspiron 14 7000 Service Manual

Procedure

1. Note the routing and remove the antenna cables from the routing guides on the fan.
2. Open the latch and disconnect the display cable from the system board.

   

3. Open the display at an angle of 90 degrees.
4. Place the computer on the edge of a table so that the palm rest and keyboard assembly is on the table and the display assembly extends past the table edge with the display hinges facing up.
5. Remove the four screws (M2.5x5) that secure the display hinges to the palm rest and keyboard assembly.
6. Lift the display assembly off the palm rest and keyboard assembly.