Dell Latitude 5480 Owner's Manual

PDF

Removing display panel

Steps

  1. Follow the procedure in Before working inside your computer.
  2. Remove the:
    1. base cover
    2. battery
    3. WWAN card (optional)
    4. WLAN card
    5. display hinge cover
    6. display assembly
    7. display bezel
  3. Remove the M2*3 screws that secure the display panel to the display assembly [1] and lift to turn over the display panel to access the eDP cable [2].
    Figure displaying how to remove the screws that secure the display panel and how to lift to flip the display panel to access the eDP cable.
  4. To remove the display panel:
    1. Peel the adhesive tape [1].
    2. Lift the blue tape that secures the eDP cable [2].
    3. Lift the latch and disconnect the eDP cable from the connector on the display panel [3] [4].
    Figure displaying how to peel the adhesive to access the display cable.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\