Dell ThinOS 10.x Hardware Compatibility List
ThinOS 10.x Hardware Compatibility List
The Hardware Compatibility List (HCL) identifies all systems that are tested and validated by Dell for use with ThinOS 10.x. ThinOS 10.x can also run on a wide range of Dell and non-Dell commercial client devices that meet the minimum hardware and component requirements.
- Devices not listed—For any Dell or non‑Dell device not in the Hardware Compatibility List (HCL), customers may use the USB imaging process to load the ThinOS 10.x ISO. This automatically launches the ThinOS Compatibility Checker, which evaluates whether the device meets the minimum supported requirements. Devices that pass can be repurposed for ThinOS 10.x. Customers must validate performance in their specific use case before large‑scale deployment.
- Dell commercial devices not listed—Customers can request validation of additional devices through their Dell Sales representative.
For more information, see the Dell ThinOS 10.x Compatibility Checker User Guide.
The following table categorizes ThinOS 10.x supported platforms that are based on Dell Technologies validation levels:
- Validated Platforms—All configuration settings have been tested, and feature functionality is confirmed to be compatible with ThinOS 10.x.
- Conditionally Supported Platforms—Systems are qualified for ThinOS 10.x based on validated platform equivalency. Customers should test desired functionality in their own environment to confirm compatibility with their expected use case as some functionality may not be fully supported.
NOTE:For ThinOS 10 conversions, eligibility is determined by the device’s
total storage capacity, not the available or free space reported in WMS. A device with a
minimum of 32 GB total storage fully meets the conversion requirement, regardless of the
available space displayed in WMS. WMS may report reduced available space due to
system‑reserved partitions; however, this does not impact the device’s eligibility for ThinOS
10 conversion.
NOTE:Devices marked with a double asterisk ** can
be repurposed to ThinOS using either a USB key–based installation or a PXE boot deployment
method. Deployment procedures may vary depending on manufacturer‑specific BIOS configurations
and hardware behavior.
ThinOS 10.x Hardware Compatibility List—Validated Platforms
This table lists platforms that are fully validated for ThinOS 10.x, confirming that all configuration settings and features are tested and fully compatible.
| Platform | Models |
|---|---|
| Dell Wyse | Dell Wyse 5070 Thin Client |
| Dell Wyse 5070 Extended Thin Client | |
| Dell Wyse 5470 Mobile Thin Client | |
| Dell Wyse 5470 All-in-One | |
| Dell OptiPlex | Dell OptiPlex 3000 Thin Client NOTE:This device is
available from the factory with ThinOS pre-installed. |
| Dell OptiPlex 5400 All-in-One | |
| Dell OptiPlex All-In-One 7410 | |
| Dell OptiPlex All-in-One 7420 | |
| Dell OptiPlex Micro Plus 7010 | |
| Dell OptiPlex Micro Plus 7020 | |
| Dell Workstations | Dell Precision 3280 |
| Dell Precision 3260 Compact | |
| Dell Latitude | Dell Latitude 3420 |
| Dell Latitude 3440 | |
| Dell Latitude 3330 | |
| Dell Latitude 3450 | |
| Dell Latitude 5440 | |
| Dell Latitude 5450 | |
| Dell Latitude 5520 | |
| Dell Latitude 5530 | |
| Dell Latitude 5540 | |
| Dell Latitude 5550 | |
| Dell Pro Series NOTE:Select the Ubuntu
24.04 for Managed Clients OS option when ordering new devices to enable automated
ThinOS 10.x conversion and ensure a valid configuration. |
Dell Pro Micro Thin Client Q9M1260 NOTE:This device is
available from the factory with ThinOS pre-installed. |
| Dell Pro 14 PC14250 NOTE:This device is available from
the factory with ThinOS pre-installed. |
|
| Dell Pro 24 All-in-One QC24251 NOTE:This device is
available from the factory with ThinOS pre-installed. |
|
| Dell Pro 24 All-in-One QC24250 | |
| Dell Pro 24 All-in-One Plus QB24250 | |
| Dell Pro 16 Plus PB16250 | |
| Dell Pro 16 PC16250 | |
| Dell Pro Micro QCM1250 | |
| Dell Pro Max 16 Plus MB16250 | |
| Dell Pro Max 14 MC14250** | |
| Dell Pro Max 16 MC16250** | |
| Dell Pro Tower QCT1250 | |
| Dell Pro Tower Plus XE5 OEM QBT1250** | |
| Dell Pro Slim Plus QBS1250 | |
| Dell Pro Slim Plus XE5 OEM QBS1250** | |
| Dell Pro Rugged 13 RA13250 | |
| Dell Pro Rugged 14 RB14250 | |
| Dell Pro 14 Plus PB14250 | |
| Dell Pro 13 Plus PB13250 | |
| Amulet Hotkey NOTE:If you deploy ThinOS 10.x on a
non-Dell device, any hardware support must be obtained directly from the device
manufacturer. Dell provides support only for ThinOS software. |
Amulet Hotkey DX1500 series** |
| Medix 24 v3 NOTE:If you deploy ThinOS 10.x on a non-Dell
device, any hardware support must be obtained directly from the device
manufacturer. Dell provides support only for ThinOS software. |
Tangent Medix 24 v3** |
NOTE:Dell units may be ordered with the Ubuntu 24.04 for Managed
Clients option, allowing the device to be deployed out of the box, automatically connect to
WMS, and convert to ThinOS without manual intervention. Contact your Dell sales
representative for information on supported models.
ThinOS 10.x Hardware Compatibility List—Conditionally Supported Platforms
This table lists platforms that are qualified for ThinOS 10.x based on validated platform equivalency, and customers are advised to test their required functionality in their own environments to ensure compatibility.
| Platform | Models |
|---|---|
| Dell Workstations | Dell Precision 3490 |
| Dell Precision 3590 | |
| Dell Precision 3680 | |
| Dell Precision 5690 | |
| Dell Latitude (DHC enabled platforms) | Dell Latitude 3550 |
| Dell Latitude 7450 | |
| Dell Latitude 7650 | |
| Dell Pro Series NOTE:Select the Ubuntu
24.04 for Managed Clients OS option when ordering new devices to enable automated
ThinOS 10.x conversion and ensure a valid configuration. |
Dell Pro Micro XE QBM1250** |
| Dell Pro Micro Plus QBM1250** | |
| Dell Pro Tower Plus QBT1250** | |
| Dell Pro Slim Low SFF QCS1250** | |
| Dell Pro Micro Plus FCM2250** (Verified for Intel Chipset) | |
| Dell Pro Max Micro XE FCM2250** (Verified for Intel Chipset) | |
| Dell Pro Micro Plus QCM1255** | |
| Amulet Hotkey NOTE:If you deploy ThinOS 10.x on a
non-Dell device, any hardware support must be obtained directly from the device
manufacturer. Dell provides support only for ThinOS software. |
Amulet Hotkey DX1700 series** |
NOTE:For any other supported Dell or third‑party model, units can be
converted or repurposed to ThinOS using either a USB key installation or a PXE boot process.
The specific deployment workflow may vary depending on the device manufacturer and available
BIOS functionality. For more information, see Dell ThinOS 10.x Migration Guide
at Support | Dell.
NOTE:ThinOS does not web‑post BIOS packages for these qualified
platforms. For information on supported models and applicable BIOS packages, contact your
Dell sales representative.
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\