Inspiron 14 5410 Service Manual

PDF

Installing the wireless card

Prerequisites

If you are replacing a component, remove the existing component before performing the installation process.

About this task

The following image(s) indicate the location of the wireless card and provides a visual representation of the installation procedure.

Installing the wireless card

Steps

  1. Connect the antenna cables to the wireless card.
    Table 1. Antenna-cable color schemeThe following table provides the antenna-cable color scheme for the WLAN card of your computer.
    Connectors on the wireless card Antenna-cable color Silkscreen marking
    Main White MAIN △ (white triangle)
    Auxiliary Black AUX ▲ (black triangle)
  2. Place the wireless-card bracket on the wireless card.
  3. Align the notch on the wireless card with the tab on the M.2 card slot on the system board.
  4. Slide the wireless card into the M.2 card slot on the system board.
  5. Replace the screw (M2x4) that secures the wireless card and wireless-card bracket to the system board.

Next steps

  1. Install the base cover.
  2. Exit Service Mode.
  3. Follow the procedure in After working inside your computer.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\