Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell Latitude 7480 Owner's Manual

Installing heat sink assembly

Heat sink assembly consists of heat sink and the system fan.
  1. Align the heat sink assembly with screw holders on the system board .
  2. Tighten the M2.0 x 3.0 screws to secure the heat sink assembly to the system board.
    NOTE: Tighten the screws in the order of the callout numbers [1, 2, 3, 4] as indicated on the heat sink.
  3. Connect the fan cable to the connector on the system board.
  4. Connect the battery cable to the connector on the system board.
  5. Install the base cover.
  6. Follow the procedure in After working inside your computer.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\