Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products

Dell Latitude E5450 / 5450 Owner's Manual

Installing the Display Assembly

  1. Place the display assembly to align with the screw holders on the computer.
  2. Route the WWAN, WLAN, and display cables through their routing channels.
  3. Tighten the screws to secure the display assembly to the computer.
  4. Connect the WWAN and WLAN cables to their connectors.
  5. Connect the display cable to the system board, place the display-cable bracket over the connector, and tighten the screw to secure the display cable to the computer.
  6. Install the:
    1. display-hinge brackets

    2. palmrest

    3. keyboard

    4. keyboard trim

    5. battery

    6. base cover

  7. Follow the procedures in After Working Inside Your Computer .

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\