If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The figure indicates the location of the memory module and provides a visual
representation of the installation procedure. Figure 1. Installing the memory
modules
Steps
Align the notch on the memory module with the tab on the memory-module slot.
Slide the memory module firmly into the slot at an angle.
Press the memory module down until it clicks into place.
NOTE:If you do not hear the click, remove the memory module and reinstall it.
CAUTION:To prevent
damage to the memory module, hold the memory module by the edges. Do not
touch the components or metallic contacts on the memory module as
electrostatic discharge (ESD) can inflict severe damage on the components.
To read more about ESD protection, see ESD protection.
