Dell Pro 14 PC14250 Owner's Manual

PDF

Screw list

NOTE:When removing screws from a component, it is recommended to note the screw type and the quantity of screws, and then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is restored when the component is replaced.

NOTE:Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surfaces when replacing a component.

NOTE:Screw color may vary depending on the configuration ordered.

Table 1. Screw listThe following table provides the different screws that are used in your Dell Pro 14 PC14250.
Component	Screw type	Quantity	Screw torque strength	Screw image
Base cover	M2.5x6 (Captive)	9	2.55 kgf-cm to 3.45 kgf-cm
Battery	M2x3 (Captive)	4	1.36 Kgf-cm to 1.84 Kgf-cm
Battery	M2x4	1	1.98 Kgf-cm to 2.42 Kgf-cm
Solid state drive	M2x3	1	1.36 Kgf-cm to 1.84 Kgf-cm
Wireless card	M2x3	1	1.36 Kgf-cm to 1.84 Kgf-cm
Fan	M2x3	2	1.36 Kgf-cm to 1.84 Kgf-cm
Power-adapter port	M2.5x5	2	2.55 kgf-cm to 3.45 kgf-cm
Heat sink	M2x5.4 (Captive)	4	1.36 Kgf-cm to 1.84 Kgf-cm
I/O board	M2.5x5	2	2.55 kgf-cm to 3.45 kgf-cm
I/O board	M2x3	3	1.36 Kgf-cm to1.84 Kgf-cm
Power button/Power button with fingerprint reader (optional)	M2x2	2	1.36 Kgf-cm to 1.84 Kgf-cm
System board	M2.5x5	2	2.55 kgf-cm to 3.45 kgf-cm
	M2x3	3	1.36 Kgf-cm to 1.84 Kgf-cm
	M2x5	2	1.36 Kgf-cm to 1.84 Kgf-cm
USB Type-C module	M2x5	3	1.36 Kgf-cm to 1.84 Kgf-cm
Keyboard	M2x2.2	22	1.36 Kgf-cm to 1.84 Kgf-cm
Keyboard support plate	M2x2.2	2 8	1.36 Kgf-cm to1.84 Kgf-cm
Display assembly	M2.5x5	4	2.55 kgf-cm to 3.45 kgf-cm
Display-panel assembly	M2.5x2.5	4	2.55 kgf-cm to 3.45 kgf-cm
Display-panel assembly	M2.5x3.5	4	2.55 kgf-cm to 3.45 kgf-cm
Smart card reader	M2x2.2	4	1.36 Kgf-cm to 1.84 Kgf-cm
USH board	M2x2	2	1.36 Kgf-cm to 1.84 Kgf-cm