Windows 11 IoT Enterprise LTSC 2024 Deployment Guide

Register devices using Wyse Device Agent

1. Log in to the device as an administrator.
2. Open the Wyse Device Agent application located in the System Tray.
   The Wyse Device Agent screen is displayed.
3. From the Management Server drop-down list, select Wyse Management Suite.
4. Enter the appropriate server address and port number for your data center:
   • If you are using the WMS cloud environment:
     • US data center—us1.wysemanagementsuite.com
     • EU data center—eu1.wysemanagementsuite.com

     The default port number is 443.

   • If you are using the WMS on-premises environment, enter the on-premises FQDN address and the custom port number.
   NOTE:If the server address contains http, a warning message is displayed. Click Ok to confirm.
5. Enter the group token in the Tenant and Group field. For example, if the group token for the group is defa-Acme@123, enter defa in the Tenant field and Acme@123 in the Group field.
6. Enable or disable Validate Server Certificate CA.
   If you disable Validate Server Certificate CA, a warning message is displayed. Click Ok to confirm.

   NOTE:For the cloud environment of WMS, Validate Server Certificate CA must be enabled.
7. Click Register to complete the process.
   The status of the registration is displayed in the bottom left corner of the Wyse Device Agent screen.