Dell ThinOS 10.x 2602 and 2605 Release Notes

Disabling the UEFI Network Stack and deploying the OS Firmware Upgrade for Group 2

After the Security Add-on installation is complete and the system has rebooted, disable the UEFI Network Stack and deploy the OS firmware upgrade.

1. Log in to Wyse Management Suite.
2. Go to the Groups & Configs page, and select a group.
3. From the Edit Policies drop-down menu, select ThinOS 10.x.
   The Configuration Control | ThinOS 10 window is displayed.
4. In the left pane, click Standard.
5. From the Standard menu, expand Firmware.
6. Click Firmware Package Updates or Application Package Updates.
   NOTE:If you cannot locate the Firmware option under the Standard tab, use the Advanced tab.
7. Click Browse to browse and upload the firmware or application package.
   The EULA and vendors details are displayed.
8. Verify the vendor names and license agreement and then click Accept to upload the package.
9. Select the package from ThinOS 10 Firmware/Application Package drop-down menu.
10. Click Save & Publish.
    The thin client downloads the package, installs it, and then restarts.

    NOTE:If Type-C devices are connected, the upgrade fails. Disable the UEFI Network Stack before proceeding with the upgrade.